IRC log for #koha, 2009-12-05

All times shown according to UTC.

Time S Nick Message
00:00 brendan left #koha
00:00 Genji @quote stats
00:00 munin Genji: There are 44 quotes in my database.
00:00 pianohackr|work bbl
00:00 pianohackr|work left #koha
00:04 ricardo joined #koha
00:04 ricardo Hi everyone!  :)
00:06 moodaepo left #koha
00:13 ricardo left #koha
00:40 nengard joined #koha
01:05 nengard left #koha
01:28 brendan joined #koha
01:44 brendan evening
01:45 masonj left #koha
01:45 pianohacker joined #koha
01:45 pianohacker hello again
01:46 brendan heya pianohacker
02:51 ricardo joined #koha
02:51 ricardo Hi again.
02:51 ricardo Is chris around?
03:03 pastebot "ricardo" at pasted "Full output of " pt-PT" for the 3.0.x branch after the 04-Dec-2009 commits" (1529 lines) at
03:03 ricardo @later tell chris Hi chris. I just updated the Staff and OPAC Portuguese PO files from your Dec 4 git commit (29ac0558e03c08a088a633f9cb965db014b57ead) for the 3.0.x branch and I'm getting the following error at the end of the "./ pt-PT" command output: "po/pt-PT-i-opac-t-prog-v-3000000.po: PO file is corrupted, or not a PO file". Are you aware of this? Should I (try to) do...
03:03 munin ricardo: The operation succeeded.
03:03 ricardo ...anything on my side to correct this? Full output available at:
03:04 ricardo It's 3 AM. I'm going to bed now... If someone sees chris, please ask him to see the above message and log. Thanks!  :)
03:05 Genji ookay.
03:06 ricardo Genji: Cool, many thanks!  :)  Take care!
03:07 ricardo left #koha
04:17 masonj joined #koha
04:18 masonj left #koha
04:18 masonj joined #koha
04:37 wizzyrea left #koha
04:44 pianohacker left #koha
06:31 CGI348 joined #koha
06:31 CGI348 hi all
06:32 CGI348 I have run this command
06:32 CGI348 $ sudo cpan Algorithm::CheckDigits SMS::Send HTTP::OAI
06:33 CGI348 now after installing lot of packages my terminal show below
06:33 CGI348 cpan[2]>
06:33 CGI348 now what should I do?
06:35 CGI348 left #koha
06:35 CGI348 joined #koha
06:36 CGI348 is any one there to help me?
06:37 anasha joined #koha
06:37 CGI348 slef: r u there?
06:37 CGI348 I need ur help
06:40 CGI348 I run this command 'sudo perl -MCPAN -e 'shell''
06:41 CGI348 I went om cpan[1]>Algorithm::CheckDigits SMS::Send HTTP::OAI
06:41 CGI348 now Im at cpan[2]>
06:41 CGI348 wht should I do now?
06:44 CGI348 is any one there?
07:00 CGI348 left #koha
07:46 CGI852 joined #koha
07:47 CGI852 hi
07:48 CGI852 I want to initialized /etc/perl/CPAN/ initialized
07:48 CGI852 but it show permision denied?
07:50 CGI852 plz help me>
08:00 SelfishMan CGI852: sudo
08:09 CGI852 selfishman: could u help me regarding some issues?
08:11 CGI852 I have some some cofusion.. could any one help me?
09:38 Ropuch Morning #koha
09:45 magnusenger joined #koha
09:52 Ropuch Hi magnusenger
09:52 magnusenger hi Ropuch et al!
10:13 CGI852 hi! i want to run '$ perl Makefile.PL' what should I give answers
10:13 CGI852 as Im new and dont have any idea...
10:17 Ropuch CGI852: if it's your first install just leave defaults - press enter all al the time
10:17 Ropuch an remeber that default login/paddsword is kohaadmin/katikoan (for later use)
10:24 masonj left #koha
10:27 Genji left #koha
10:43 magnusenger left #koha
10:53 CGI852 when I run Makefile.PL, it asks many qustions.
10:53 CGI852 what is the 'user account[koha]'  ???
10:53 CGI852 should I keep it same or not. as my debian account is nouman
10:54 CGI852 is any body there to suggest me?
11:00 Ropuch Like I 've said before: leave defaults, just press enter for the first time
11:02 CGI852 ropuch: couple of  thanks.. I m doing so
11:02 Ropuch Just remeber login/pass as it's needed later [;
11:04 CGI852 ropuch: ok.. after it they r several commands which I have to follow yet. hope u will guide me
11:05 Ropuch I'll try :)
11:07 Ropuch This a good guide:[…]uide_ubuntu_hardy
11:13 CGI852 roopuch: Im installing koha-3.00.04_fixed on debian-lenny, so I Im following the instructions of install.debian-lenny,  which  is in koha-3.00.04_fixed directory
11:27 si left #koha
11:32 catobear joined #koha
11:33 cato left #koha
12:03 anasha left #koha
12:35 CGI852 I want to run this command '$ sudo a2ensite koha' in debian-lenny but it show error
13:01 CGI852 Error: Site Koha does not exist!
13:03 CGI852 left #koha
13:03 CGI852 joined #koha
13:15 Ropuch CGI852: cd /etc/apache2/sites-available/ && sudo cp -s ../../koha/koha-httpd.conf ./koha
13:16 Ropuch You must first copy koha-httpd.conf from /etc/koha to /etc/apache2/sites-available
13:17 si joined #koha
13:20 CGI852 ropuch: it works
13:21 CGI852 ropuch:  it says run '/etc/init.d/apache2 reload' but it show error
13:21 CGI852 when i run it, it shows
13:22 CGI852 (13) Permission denied: make_sock: could not bind to adress [::]:80
13:23 CGI852 (13) Permission denied: make_sock: could not bind to adress
13:23 Ropuch sudo /etc/init.d/apache2 reload
13:23 CGI852 no listening sockets available, shutting dow
13:24 Ropuch Hm
13:25 Ropuch
13:26 Ropuch You can try t change listening ports in /etc/apache2/ports.conf
13:26 CGI852 ropuch: hurrah it is working I have place 'sudo'
13:26 Ropuch [;
13:26 CGI852 sudo /etc/init.d/apache2 reload
13:27 CGI852 ropuch: thank u. u r very coperative
13:29 Ropuch I'm trying :)
13:29 Ropuch I'm still around if you encounter other problems
13:30 CGI852 ropuch: my apache2 httpd.conf is empty. is it remain empty
13:34 Ropuch It's ok
13:35 masonj joined #koha
13:38 CGI852 should it right to run 'sudo a2dissite default'
13:38 masonj left #koha
13:39 masonj joined #koha
13:39 CGI852 here in documentation, written that it have side effects sp see the apache httpd manual section on virtual hosts for full instructions
13:43 CGI852 left #koha
14:05 hdl_laptop joined #koha
14:17 hdl_laptop left #koha
14:27 francharb joined #koha
14:48 francharb left #koha
14:52 hdl_laptop joined #koha
14:52 hdl_laptop chris_n around ?
14:52 hdl_laptop chris_n2 around?
14:52 chris_n2 here
14:53 hdl_laptop hi.
14:53 * hdl_laptop working on updatedatabase fixing
14:53 chris_n2 great :-)
14:53 hdl_laptop I have a question about your aqbudgets previous table.
14:54 hdl_laptop It seems that you did not have any bookfundid column.
14:54 hdl_laptop Can you confirm ?
14:54 chris_n2 om
14:54 hdl_laptop It sounds weird to me.
14:56 pastebot "chris_n2" at pasted "aqbudget table" (15 lines) at
14:56 chris_n2 it appears to be there
14:56 chris_n2 maybe 'aqbudgets' vs 'aqbudget' ?
14:59 hdl_laptop table should be renamed
14:59 hdl_laptop by updatedatabase into aqbudgets
15:00 chris_n2 this is a restored copy of my db prior to running updatedatabase
15:00 hdl_laptop ok cool.
15:00 chris_n2 I can back it up and rerun updatedb if you'd like
15:00 hdl_laptop found the problem
15:00 chris_n2 ahh... nice
15:03 chris_n2 hdl_laptop: got to run, bbl
15:12 hdl_laptop left #koha
15:20 wizzyrea joined #koha
15:24 francharb joined #koha
15:46 nicomo_laptop joined #koha
16:27 owen-away joined #koha
16:28 owen-away is now known as owen
16:31 francharb1 joined #koha
16:31 francharb1 left #koha
16:37 francharb left #koha
17:16 francharb joined #koha
17:20 francharb left #koha
17:30 francharb1 joined #koha
17:41 francharb1 left #koha
17:51 pianohackr|work joined #koha
18:03 Ropuch Hi pianohackr|work
18:03 pianohackr|work Hi Ropuch
18:30 Ropuch I wonder how much effort would it take to move language selection from web installer to Makefile. Generating and installing templates for all langauges is taking so long (comparing 3.00.4 install with 3.2 with just english)
18:34 cait joined #koha
18:34 cait hi #koha
18:34 Ropuch Hi cait
18:34 cait hi Ropuch :)
18:56 nicomo_laptop left #koha
19:03 Genji joined #koha
20:38 masonj_ joined #koha
20:41 masonj left #koha
20:43 Genji anyone familiar with exploring data indexes using yaz-client?
20:46 pianohackr|work Genji: I've poked around with yaz-client a _teensy_ bit, what's up?
20:50 Genji im trying to figure out why st-numeric gives no results, and i can't do any relational operators on it. Im working with pubdate, from 260$c, and its supposed to be 4 digit numbers.
20:50 pianohackr|work Ahh, zebra stuff
20:50 pianohackr|work *shiver*
20:51 pianohackr|work have you bugged gmcharlt about it? He's the closest thing we have to an expert on that crazy thing
20:52 Genji hmm?
20:52 Genji haven't seen anything hes written.... does he speak?
20:54 Genji @quote search gmcharlt
20:54 munin Genji: 3 found: #23: "<gmcharlt> /msg munin register nick password", #31: "<@gmcharlt> but hacking Koha *should* be a...", and #6: "gmcharlt: kf: hold requests are a plot to sell..."
20:54 Genji @quote get 31
20:54 munin Genji: Quote #31: "<@gmcharlt> but hacking Koha *should* be a restful part of any vacation ;)" (added by chris at 07:31 PM, September 02, 2009)
20:54 Genji @quote get 6
20:54 munin Genji: Quote #6: "gmcharlt: kf: hold requests are a plot to sell more aspirin ;)" (added by wizzyrea at 12:13 PM, June 16, 2009)
20:57 pianohackr|work Galen's pretty quiet, but knowledgeable
20:57 pianohackr|work He might be logged in and not reachable, but you should be able to get a hold of him
20:58 pianohackr|work (either gmcharlt or gmcharlt_)
20:58 masonj joined #koha
20:59 masonj_ left #koha
21:07 pianohackr|work bbl
21:07 pianohackr|work left #koha
21:09 francharb joined #koha
21:10 francharb left #koha
21:45 cait left #koha
22:47 masonj left #koha
23:29 rhcl joined #koha
23:30 rhcl is now known as rhcl_home
23:42 Genji anyone familiar with Zebra, currently awake?
23:42 Genji I think ive got pubdate indexed in numeric and year.. but neither want to be found as that.. i.e st-numeric and st-year show nothing.

| Channels | #koha index | Today | | Search | Google Search | Plain-Text | plain, newest first | summary