Time  Nick              Message
00:52 schnydszch        Hi all! I am still stuck with starting my kohadev
00:52 schnydszch        koha-es-1         | [2022-11-04T00:46:18,945][INFO ][o.e.l.LicenseService     ] [9wAl3JA] license [8c9a77ac-4ace-4e3a-998e-dddd8fcf3332] mode [basic] - valid
00:53 schnydszch        that's the last line where it is stucked. hmmm.. I already adjusted vm.max_map_count
01:54 schnydszch        I added some swap into the system, re-run command "ku", now, this is what I am getting: Error response from daemon: cannot stop container: f1956468b9cdaefca5d8d6ca69e5a92333d138f66ba99a88a5e96406d3077b36: permission denied
02:57 mtj               schnydszch: try stopping , then starting again
02:57 mtj               kd; kd
02:58 mtj               well, try control-c first, then kd; kd
02:58 mtj               then ku
02:59 mtj               your system probably wants 3 gigs ram, to be happy
03:01 mtj               i always run kd twice, when restarting - just to make sure :0)
03:05 schnydszch        hi mtj! It seems that was the problem. just deleted the first and trying out again
03:06 mtj               perhaps we should fix the 'kd' alias to run twice :)
03:06 schnydszch        well added some swap then issued: # Increase vm.max_map_count
03:06 schnydszch        sudo sysctl -w vm.max_map_count=262144
03:06 schnydszch        # Make it permanent
03:06 schnydszch        echo "vm.max_map_count=262144" | sudo tee -a /etc/sysctl.conf
03:07 schnydszch        tried kd
03:07 schnydszch        [+] Running 0/4
03:07 schnydszch        â ¿ Container koha-db-1         Error while Stopping                                                                                         14.1s
03:07 schnydszch        â ¿ Container koha_selenium_1   Error while Stopping                                                                                         14.1s
03:07 schnydszch        â ¿ Container koha_es_1         Error while Stopping                                                                                         14.1s
03:07 schnydszch        â ¿ Container koha-memcached-1  Error while Stopping                                                                                         14.1s
03:07 schnydszch        Error response from daemon: cannot stop container: f5e70168dfdcb8ddf84adda9800b6d602d93ebba54bd67e1ca9b9d123b5811b2: permission denied
03:07 schnydszch        now that is the error
03:08 mtj               hmm, a reboot would fix it :/
03:08 mtj               /etc/init.d/docker restart
03:08 mtj               perhaps try to restart docker 1st
03:10 mtj               schnydszch: how much RAM does your system have?
03:10 mtj               you are running debian/ubuntu?
03:10 schnydszch        4GB ram, then another 4gb swap
03:10 schnydszch        ubuntu 20.04
03:11 mtj               which docker-compose version?
03:11 mtj               docker-compose version
03:11 mtj               Docker Compose version v2.10.2
03:12 mtj               apt policy docker-ce | head
03:13 mtj               Installed: 5:20.10.18~3-0~debian-buster
03:13 schnydszch        root@ubuntu-s-2vcpu-4gb-sgp1-01:~# docker-compose version
03:13 schnydszch        docker-compose version 1.25.0, build unknown
03:13 schnydszch        docker-py version: 4.1.0
03:13 schnydszch        CPython version: 3.8.10
03:13 schnydszch        OpenSSL version: OpenSSL 1.1.1f  31 Mar 2020
03:13 schnydszch        root@ubuntu-s-2vcpu-4gb-sgp1-01:~# apt policy docker-ce | head
03:13 schnydszch        WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
03:13 schnydszch        docker-ce:
03:13 schnydszch        Installed: 5:20.10.21~3-0~ubuntu-focal
03:13 schnydszch        Candidate: 5:20.10.21~3-0~ubuntu-focal
03:13 schnydszch        Version table:
03:13 schnydszch        *** 5:20.10.21~3-0~ubuntu-focal 500
03:13 schnydszch        500 https://download.docker.com/linux/ubuntu focal/stable amd64 Packages
03:13 schnydszch        100 /var/lib/dpkg/status
03:13 schnydszch        5:20.10.20~3-0~ubuntu-focal 500
03:13 schnydszch        500 https://download.docker.com/linux/ubuntu focal/stable amd64 Packages
03:13 schnydszch        5:20.10.19~3-0~ubuntu-focal 500
03:14 mtj               hmm, can you reboot and try again?
03:14 mtj               ooh wait..
03:14 schnydszch        I have already rebooted :)
03:14 mtj               aah :)
03:14 mtj               docker volume prune -f
03:14 mtj               docker image  prune -f
03:14 mtj               docker system prune -a -f
03:15 mtj               ..you can wipe your old docker stuff using 'prune' command
03:15 schnydszch        oh so this command is to delete all containers?
03:15 schnydszch        seems like it
03:15 mtj               yeah
03:15 mtj               i have used it for similar 'permission denied' errors
03:16 schnydszch        and so the koha I cloned is already deleted?
03:16 mtj               koha git repo will still be there
03:17 mtj               docker prune just removes old docker stuff
03:19 schnydszch        hmm koha folder was removed
03:20 schnydszch        anyway, I just cloned it again
03:23 mtj               schnydszch: if you have more problems... upgrade docker-compose to v2
03:23 mtj               https://docs.docker.com/compose/install/linux/#install-using-the-repository
03:24 mtj               v2 might be more reliable...
03:27 schnydszch        hmmm.. i will just have to run those stated in the docs.docker? and my docker will be updated?
03:57 mtj               $ sudo apt-get install docker-ce docker-ce-cli containerd.io docker-compose-plugin
03:57 mtj               schnydszch: that should update you ^
03:57 mtj               ..you are already using the docker apt repo
03:58 mtj               docker-compose-plugin will get you ... docker-compose v2
03:58 mtj               then kd; kd; ku
03:59 mtj               ..if you get some 'permission denied' error,  try the docker prune command(s)
04:42 schnydszch        mtk: thanks!
04:42 schnydszch        mtj: thanks!
07:31 reiveune          hello
07:47 SupportLibrary[m] Hi
07:52 SupportLibrary[m] Hello. I am writing to you with a request for help. After I created a new .pl file and put it in build_folder. How to reflect the changes so that it is visible in Koha?
08:01 alex_             Bonjour
08:47 fridolin          SupportLibrary[m]: mmm how did you install Koha ? Debian Package  ?
08:50 fridolin          perl files should be in /usr/share/koha/lib
08:50 SupportLibrary[m] Yes and i found it
08:50 fridolin          you may need to restart plack middleware
08:50 SupportLibrary[m] I put the file there and evrything is okey
08:51 fridolin          https://wiki.koha-community.org/wiki/Commands_provided_by_the_Debian_packages#koha-plack
08:51 fridolin          Have a look at https://gitlab.com/koha-community/koha-gitify can be usefull
08:52 fridolin          Because package upgade may remove your changes
08:52 fridolin          you may build your own deb package i think
08:52 fridolin          or reapply changes after each upgrade
09:27 marcelr           o/
09:37 Joubu             Can I get help on bug 30310? Could someone apply the patches and confirm they get (or don't get) the warning in the console?
09:37 huginn`           04Bug https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=30310 enhancement, P5 - low, ---, jonathan.druart+koha, Failed QA , Replace Moment.js with Day.js
09:39 marcelr           they apply Joubu
09:40 marcelr           let me check if I see a warning
09:42 marcelr           I am seeing: Uncaught TypeError: t is undefined     /intranet-tmpl/lib/dayjs/dayjs.min_22.0600077.js:1     :246
09:46 Joubu             I have not idea why, but I don't get them, and they don't appear in the sandbox either
09:47 Joubu             marcelr: where do you see the warning? mainpage?
09:48 marcelr           right on mainpage
09:48 Joubu             https://staff-bz30310.sandboxes.biblibre.eu/cgi-bin/koha/mainpage.pl - not there, right?
09:48 marcelr           no my own container
09:49 Joubu             that's fun...
09:49 marcelr           debugging fun
09:49 Joubu             yes, especially when I am the only one not getting the error!
09:50 Joubu             I am missing something obvious here
09:50 marcelr           familiar experience ;)
09:53 Joubu             ha
09:53 Joubu             ok
09:53 Joubu             The following paths are ignored by one of your .gitignore files:
09:53 Joubu             koha-tmpl/intranet-tmpl/lib/dayjs/plugin
09:53 Joubu             Use -f if you really want to add them.
09:54 Joubu             I have one file that is not committed there
09:54 Joubu             but it does not appear in git status because "plugin" is in .gitignore
09:54 marcelr           thats progress
09:55 Joubu             marcelr: can you try again with the last patch please?
09:57 marcelr           warning is gone
09:58 Joubu             thanks, marcelr!
09:59 marcelr           do not ignore gitignore
10:40 Joubu             @later tell mtj aware of the 00-strict failures? https://jenkins.koha-community.org/job/Koha_Master_D12/333/consoleFull
10:40 huginn`           Joubu: The operation succeeded.
10:40 Joubu             @later tell mtj "Can't locate HTTPD/Bench/ApacheBench.pm in @INC"
10:40 huginn`           Joubu: The operation succeeded.
11:03 Joubu             oleonard: https://snipboard.io/fNbTzQ.jpg - shouldn't we have the other "x" back to red as well?
11:05 * ashimema        puts money on davidnind not being around yet
11:07 oleonard          Joubu I'd probably choose to change the link altogether to make it match instances like this: https://snipboard.io/6uLlny.jpg
11:10 * ashimema        likes oleonards suggestion.
11:10 ashimema          so much cleare
11:10 ashimema          * so much clearer
11:12 Joubu             oleonard: ok thanks
11:14 Joubu             tcohen: curbside pickup broken, see follow-up on 30718
11:17 Joubu             oleonard: aware of "fa-fw"
11:17 Joubu             ?
11:17 oleonard          yes
11:17 Joubu             for fixed-width
11:17 Joubu             we should use that in those situations
11:17 Joubu             <i class="fa fa-fw fa-trash"></i>Remove</a>
11:18 Joubu             instead of
11:18 Joubu             <i class="fa fa-trash"></i> Remove</a>
11:18 Joubu             shouldn't we?
11:19 tcohen            hola #koha o/
11:20 Joubu             forget that, that's not what their doc says
11:21 oleonard          Joubu: Was there a display issue you were hoping to solve?
11:24 Joubu             oleonard: not really, there is fa-fw on the current green 'x', and none on the 'trash' icon for guarantor. I've tested the difference and noticed that, with fa-fw you don't need the space betwee <i> and 'Remove'
11:24 Joubu             but nevermind, I will remove fa-fw and add the space, to match other occurrences
11:25 oleonard          fa-fw is used on the OPAC's bibliographic detail page for the sidebar menu because in that situation it helps the icons and text line up vertically
11:28 Joubu             bug 32108. Thanks, oleonard!
11:28 huginn`           04Bug https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=32108 minor, P5 - low, ---, jonathan.druart+koha, Needs Signoff , Change "x" icon to replace patron when scheduling a pickup
11:33 oleonard          Joubu: You didn't file a bug yet for this one did you? https://snipboard.io/2ets1d.jpg
11:34 ashimema          I have one for you now oleonard.. it comes from comments from davidnind on my catalog concerns work.
11:35 ashimema          He's keen for feedback that an action has taken place on modal submissions
11:35 ashimema          which I can understand
11:35 ashimema          in a few other places we add add our standard 'alert' box at the top above the header on the page.. things like 'Thing X updated successfully'
11:36 ashimema          does that make sense to you.. it feels like a slightly icky page re-arrange to me.. by adding it in there we shift the page content down..
11:36 ashimema          I'm probably overthinking
11:36 Joubu             oleonard: I thought I did, but cannot find it right now! Maybe I only reported it on IRC
11:37 ashimema          it's the sort of thing a toast would work nicely for
11:37 oleonard          a.... toast?
11:37 * oleonard        is reminded he hasn't had breakfast yet
11:37 ashimema          hehe
11:38 ashimema          little temporary popovers that detail an action happened then dissaper a few moments later.. or are dismissable if you decide to opt to have them stay around instead of expire and dissaper
11:38 ashimema          I think we used to have something like that in sysprefs.. might still have it...
11:38 * ashimema        checks
11:39 oleonard          Right HumanMsg
11:39 ashimema          ah yeah.. that's it.
11:39 ashimema          that's a toast UX
11:39 ashimema          w don't use those anywhere else do we?
11:39 ashimema          hyst the sysprefs
11:40 ashimema          wow.. they sitck around for a while and are really in your face..
11:40 * ashimema        likes less obtrusive bottom right style toasts
11:40 oleonard          Yes, one or two other places I think... Advanced cataloging I think is one
11:52 Joubu             asking because you are having a look at erm? I am displaying a sticky dialog at the top when something wrong happens after a form submission
11:57 ashimema          Haha, I hadn't noticed that yet Joubu
11:58 ashimema          Nah, I have no issues with eRM so far.. been working through the code.. everything so far that I've questioned I've gone and looked at vue docs and decided you've taken the right approach
11:58 ashimema          Actually, on that, I reckon I'm nearly ready to add my sign off
11:58 ashimema          I did comment about possibly sharing more CSS rather than doing that scoped stuff.. but at the same time I've not really dug deep enough to know if that's a silly proposal
11:59 ashimema          It's also something we can do later.. I expect polishing to continue as part of the overall UI polishing going on
12:00 Joubu             yes, I like to have everything inside the component, but that leads to duplicate css rules...
12:01 Joubu             do we change something about flatpickr and the "disabled" property? curbside pickup is broken at the OPAC because of that, but cannot find the root of the problem
12:01 Joubu             did we*
12:04 ashimema          my feeling is that we can have css inside with the components.. but stick to only things that are really specific to that one component.. if we find ourselves repeating css then that css should get moved up into our global and thus unscoped
12:05 oleonard          That would be my instinct as well
12:05 ashimema          so in most cases I'm envisaging we won't need to have a really narrowly scoped piece and thus won't have it bunched in with the component itself.
12:05 ashimema          but there might be the odd case and in those cases I love having it right there in front of me in the same component file rather than having to work my way backwards to the scss source file somewhere else...
12:05 ashimema          hope that makes sense
12:06 ashimema          but yeah.. for me it's not a QA fail right now.. just something to be aware of and consider a coding guideline for and fixes down the line.
12:06 ashimema          as for broken curbside.. no idea I'm afraid
12:12 tcohen            Joubu: is there a report for the breakage?
12:12 Joubu             not yet
12:13 Joubu             git bisect blames 30718 as well
12:30 Joubu             tcohen: bug 32111
12:30 huginn`           04Bug https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=32111 critical, P5 - low, ---, jonathan.druart+koha, ASSIGNED , Cannot schedule a pickup at the OPAC
12:32 Joubu             NSO now
15:40 Joubu             @later tell oleonard do you think this is reasonable (the refresh section)? https://snipboard.io/sfo6We.jpg - bug 30963
15:40 huginn`           Joubu: The operation succeeded.
15:53 huberto           Is there anything special that I need to add when making a curl request to the API?
15:54 huberto           I am testing using 'PUT /api/v1/contrib/kitchensink/patrons/patate/bother' but keep getting "Authentication failure" errors, despite having using -u 'username:password'.
15:55 Joubu             huberto: do you know Postman?
15:57 huberto           I do, I have the same error in Postman. I have double-checked that RESTBasicAuth is enabled in the system preferences.
15:59 Joubu             With Postman you can ask for the curl version of a given query. But if it does not work with postman then you are missing something else. You need to pass a header with "Authorization: Basic"
15:59 Joubu             cannot remember the exact syntax however
16:00 huberto           I thought it would work for sure with Postman, because it's trivial to input the username and password and Postman converts it to the "Authorization: Basic [...]" header.
16:01 huberto           Maybe there's something in Kitchensink that I'm missing. The Openapi.json is fairly simple so I don't know what it could be.
16:01 Joubu             do you have the same error with GET /patrons?
16:01 huberto           Let me give it a try
16:03 huberto           Do I absolutely need to send filters when trying /api/v1/patrons?
16:03 huberto           Because I'm getting the same error: "Authentication failure."
16:04 Joubu             nope, no filter
16:04 Joubu             http://kohadev-intra.mydnsname.org:8081/api/v1/patrons
16:05 Joubu             in tab Authorization, select type:"basic auth", then enter credential for your Koha user (needs the correct permissions, so pick your usual superlibrarian to be sure)
16:07 huberto           Well at least it's good to know I'm not doing anything wrong. This is exactly what I'm using and I keep getting Authentication failure.
16:09 Joubu             something else in Koha logs?
16:09 Joubu             are you using koha-testing-docker?
16:13 huberto           Nothing that I can see in the logs, nothing's been added there for the past hour or so, despite my tests.
16:15 huberto           I am not using docker for this one, it's a standard installation, albeit "inLibro"ised ;)
16:16 Joubu             huberto: `tail -f /var/log/$KOHA_INSTANCE/*.log`, then `restart_all` (if you have this alias), then try again, and watch the logs
16:18 Joubu             The other solution is to search for "Authentication failure" in Koha/REST/V1/Auth.pm. Find which occurrence is returned to you (modify the message for instance)
16:18 Joubu             then you will know in which situation you are
16:19 oleonard          Joubu: How did you arrive at that curbside pickups screenshot?
16:19 Joubu             look like you are missing the credential 523     unless ($credentials) {
16:20 Joubu             oleonard: with the patch from 30963
16:20 Joubu             oleonard: was it the question? Or are you asking on which screen you can find it?
16:22 oleonard          I missed the part where you mentioned the bug number before, sorry
16:26 huberto           Joubu: thanks for the remote debugging :) I will dig down starting with Auth.pm and try to find out why the credentials are not reaching it.
16:39 oleonard          Joubu: I don't think the look of the refresh options isn't perfect but I don't know what to suggest
16:40 oleonard          Joubu: I'm not sure it's working though... it does one automatic refresh and then reverts to 60 seconds
16:42 Joubu             oleonard: did you reload plack?
16:44 oleonard          Whoops, no. That made it work, thanks
16:45 oleonard          I wonder if we need a "stop" control
17:14 reiveune          bye
18:17 Guest440          Hello! I've been running a Koha instance in AWS for a little bit. We were having some issues that seemed to be tied to Mojolicious::Plugin::OpenAPI today and so I updated/graded our koha version. Since then our instance hasn't been reachable in the load balancer's target group and I'm running out of ideas to debug it. Does anyone have experience with this?
18:29 oleonard          Sorry Guest440, at this time of day not many people are round
18:30 oleonard          Guest440: There is a recent bug related to that: https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=28926
18:30 huginn`           04Bug 28926: normal, P5 - low, ---, mtj, Pushed to oldoldoldstable , Update cpanfile for Mojolicious::Plugin::OpenAPI v2.16
18:30 oleonard          I don't know if it's relevant to your situation.
18:52 huberto           Is there anything that would strip the Authorization header when making a request to the API? I dumped the headers and even though I can confirm that I'm sending the Authorization header with Postman or curl, it's not in the headers dumped inside Koha/REST/V1/Auth.pm.
20:10 huberto           It seems that on some of our servers Apache will strip the Authorization header by default. Adding `CGIPassAuth On` to the API directory worked perfectly.
21:43 huberto           Have a good weekend!
23:30 tcohen            next (monday) is ERM and OIDC
23:30 tcohen            please test and provide follow-ups!
23:30 tcohen            oleonard++
23:30 tcohen            lukeg++
23:30 tcohen            Joubu++
23:30 tcohen            cait++
23:30 tcohen            kidclamp++
23:30 tcohen            khall++
23:30 tcohen            ashimema++
23:30 tcohen            koha++
23:30 tcohen            community++
23:30 tcohen            team++
23:31 tcohen            have a great weekend y'all
23:31 tcohen            ka kite wawe koe
23:31 tcohen            ^^ is that right, rangi[m] ?