Time Nick Message 23:52 pianohackr|work There is a verbose flag 23:52 chris_n and no emails 23:52 chris_n is all I get 23:52 chris_n name;surname;address1;address2;zipcode;city;country;email;itemcount;itemsinfo 23:52 chris_n perl overdue_notices.pl -csv 23:52 chris_n hmm 23:49 pianohackr|work It can output failed messages as csv, but that's basically it 23:48 pianohackr|work I don't think so, besides stdout 23:48 chris_n does overdue_notices.pl log to anywhere? 23:41 pianohackr|work slef: around? 23:40 cait good night :) 23:39 pianohackr|work In case anybody cares; the step where you install dselect to apply the package selections on a lenny installed can be replaced with an apt-get dselect-upgrade, afaict 22:52 wizzyrea but it's funny all the same 22:52 wizzyrea no, I don't think that's it 22:52 pianohackr|work Or 3. You're slowly getting numb to its breed of insanity 22:49 wizzyrea maybe both 22:49 wizzyrea :P 22:49 wizzyrea so either 1. i'm smarter or 2. it's smarter. 22:49 wizzyrea that is to say, followed the docs on a clean install, and was able to do it step for step (with one tiny change) 22:48 wizzyrea I had a lot less trouble this time, fwiw 22:47 pianohackr|work has it changed? 22:47 wizzyrea the installer was smooth as butter. Love it. 22:45 wizzyrea 18 minutes :) 22:33 brendan same to you too :) 22:33 brendan heh - gotta answer a question then I'm gone 22:33 wizzyrea brendan: it's the weekend, no working! 21:55 biglego as long as I can import my patrons and bibs i don't mind recreating config settings I spent a good deal of time simplifying 21:55 chris_n k, time to leave... can't stand the fun any longer :-) 21:55 Ropuch I've just installed head, imported my sql dump and run the installer 21:54 pianohackr|work ahh, okay 21:54 gmcharlt pianohackr|work: not quite yet - you have to deal with some DB errors and the like 21:54 Ropuch pianohackr|work: all bugsquasher++ 21:54 biglego i'm on 3.04 21:54 pianohackr|work Ropuch++ 21:54 Ropuch HA! 21:54 Ropuch I've just updated 3.00.05 to head with no errors 21:54 pianohackr|work Do in-place 3.0.x -> 3.2 master upgrades work? 21:53 pianohackr|work I think reinstalling from scratch is a _bit_ easier, though you can keep your db 21:53 biglego I guess I should just go ahead and get on the 3.2 bandwagon anyway 21:52 biglego so another stupid question should I reinstall with git or is there away to update my current install via git to the most current. 21:52 wizzyrea it *is* a pretty epic tutorial, actually. I use it *all the time* 21:51 gmcharlt wizzyrea: there was a time when the Koha git reference page came up pretty high on a google search on 'git tutorial' 21:51 biglego cool the bar i'm hiding from the snow in has powerstrips at each booth 21:50 * chris_n is sure his coding style very much stands to be improved ;-) 21:50 pianohackr|work wizzyrea: I think chris is the only one of us who _isn't_ a git nub. It takes a little getting used to :) 21:49 pianohackr|work hehe 21:49 cait 3.4 - 3.2 is not released and I already long for 3.4 features :) 21:49 pianohackr|work chris_n: One very tiny code nitpick I see is !$a && !$b rather than !($a || $b), though that's as much personal preference as anything 21:49 * wizzyrea is a git nub 21:49 wizzyrea and these guys (and gals) are very patient/helpful to git nubs. 21:48 pianohackr|work http://www.kernel.org/pub/software/scm/git/docs/gittutorial.html might be useful, though you can skip some steps as you're starting with an existing project 21:48 biglego okay i thought i had the concept 21:47 pianohackr|work basically, yes 21:47 biglego then I can rollback to originals if I screw up my clone 21:47 biglego in a nutshell i install the latest greatest Head master, and then use it to write my changes to the files I edit 21:46 chris_n or all 21:46 chris_n or 50 21:46 chris_n you can even just update one or two if you like 21:46 wizzyrea that is brilliant, thanks for doing that 21:45 chris_n wizzyrea: here you are http://lists.koha.org/pipermail/koha-patches/2010-February/005570.html 21:45 cait sorry... 21:45 biglego stupid git question follows 21:45 cait voldemort? 21:44 wizzyrea oh you know who 21:44 chris_n I won't ask who you paid to do it 21:44 wizzyrea nah 21:44 wizzyrea lol 21:44 wizzyrea so I am SO happy to see that 21:44 chris_n I'd ask for a refund... ;-) 21:43 wizzyrea a couple of times, actually 21:43 wizzyrea as DB maintenance 21:43 wizzyrea do you know we paid to have that done 21:43 cait chris_n++ 21:43 chris_n very 21:43 * wizzyrea loves chris_n even more now 21:43 wizzyrea seriously>?! 21:43 wizzyrea OMG 21:42 * chris_n submits a script to mass update patron's notification preferences 21:40 pianohackr|work Yes, something like that :) 21:40 wizzyrea i tease, I tease 21:40 wizzyrea ;) 21:40 wizzyrea so... I would add 2 lines to the conf file then? 21:40 chris you just need to add 2 lines to the conf fle 21:40 pianohackr|work wizzyrea: Yup, you just have to add a couple lines to your koha-conf.xml 21:40 wizzyrea ty 21:40 wizzyrea kool 21:40 chris yes you can 21:40 wizzyrea can you turn on the memcached support after install time? I'd like to test it out (at some point) but not right now 21:40 biglego probably a worthwhile investment 21:39 pianohackr|work Some learning time to start, but it will make your life ten times easier in the long run 21:39 biglego usr/share/koha 21:39 pianohackr|work biglego: If you're doing many custom changes at all, you might want to look into http://wiki.koha.org/doku.php?id=en:development:git_usage 21:38 biglego scratch that I am working with the installed files in my directory 21:38 pianohackr|work I think the existing names are a teensy bit confusing, but whatever :) 21:38 biglego pianohacker I am, what I do is just rename my working directory as I try things out. I'm kinda new to this whole development thing so i'm bumbling along 21:37 wizzyrea eh, tis your right. :) 21:37 pianohackr|work I personally use a different directory, but I'm obsessive-compulsive like that 21:36 wizzyrea strike that last suggestion 21:36 wizzyrea of course you are right. lol 21:36 wizzyrea scratch that, you're right 21:35 pianohackr|work biglego: Also, it sounds like you're editing the files in the extracted source archive, and not the actual installed ones 21:35 pianohackr|work Hrm. I think kohaclone as the git tree and koha-dev as the base install directory is the convention 21:35 wizzyrea and the installation script, too 21:35 wizzyrea >.> 21:35 wizzyrea or change the wiki >.. 21:34 wizzyrea so suggest /home/X/kohaclone instead of /home/X/koha-dev 21:34 wizzyrea I wonder if in the install script, since the git documentation on the wiki suggests kohaclone as the directory, we should make the install instructions mirror that 21:33 pianohackr|work biglego: Depends a bit on what you plan to do 21:32 wizzyrea ya, things just went all esplodey 21:32 biglego any recommendations on the most generic to start with 21:32 pianohackr|work Fortunately, many of the tools are recent additions, so the code's reasonably clean 21:31 pianohackr|work biglego: The latter, unfortunately 21:31 biglego are there some generic include and template files to start with or do i need to start carving up some of the ones already there 21:30 chris wow, go to camp and deals explode 21:30 biglego time for the followup question to my creating a new tool link yesterday 21:30 wizzyrea this may be another of my projects on my never ending list of projects :P 21:29 pianohackr|work right 21:29 wizzyrea (EC2) 21:29 wizzyrea like a vbox image for Elastic Compute Cloud 21:29 pianohackr|work Ah, ok 21:29 wizzyrea Amazon Machine Image :P 21:28 pianohackr|work wizzyrea: AMI? WTFACRONYMBBQ 21:19 wizzyrea has anybody besides liblime made a koha AMI for EC2? 21:18 pianohackr|work Hehe, okay, wasn't sure :) 21:18 wizzyrea brendan* 21:18 wizzyrea oh, I'm not going, was just saying bye to schuster and brendad 21:17 pianohackr|work bye 21:17 wizzyrea heh, later peeps :) 21:14 brendan cya later #koha 21:14 schuster well just got the email at 3:08 that we are free to go home at 3 today have a nice weekend... funny,, 21:09 wizzyrea I will add it 21:09 wizzyrea apt-get update, I think 21:09 wizzyrea hrm, something crucial is missing in the lenny install docs: updating your sources :/ 21:02 pianohackr|work Bye, jane, good luck with the snow :) 21:00 jwagner Have a good weekend, everyone. Holiday here on Monday. Boy, could I use one (where I could get out of the house, that is). 20:55 wizzyrea hee 20:55 Ropuch wizzyrea: plus downloading Vbox & image :> 20:54 Ropuch Downloading was about 1/3 of the time 20:54 brendan with virtual images you can get it down to about 3 minutes :) 20:54 Ropuch ;> 20:54 Ropuch Guess I can name the manual "Koha in an hour" 20:54 wizzyrea that's pretty good ropuch 20:53 Ropuch I took 37 minutes on fresh system to get to webinstaller login 20:51 brendan makes sense :) 20:50 pianohackr|work brendan: When I'm accepted, it's skill, rejections are bad luck :) 20:50 schuster OK was able to load a small portion of my patrons.. WHEW... 20:50 Ropuch :) 20:50 wizzyrea but... it works :D 20:49 wizzyrea openjade is dumb about errors on non-sgml 20:49 brendan ah.. best of luck err... skill piano 20:49 wizzyrea it's still not quite complete 20:49 wizzyrea ropuch: you'll be happy to see - http://www.koha-community.org/documentation 20:49 pianohackr|work Not yet. Still hanging in the balance 20:48 brendan re: college 20:47 brendan any news from your front 20:47 brendan going well 20:46 pianohackr|work How are you, brendan? 20:46 brendan pianohackr|work 20:46 pianohackr|work Think web 2.0 pianos 20:46 pianohackr|work Hehe 20:46 brendan gosh darn it 20:46 brendan hiya pianohacker|work 20:46 chris_n jwagner: I grew up in northern VA and worked in Fairfax for awhile... I remember well 20:45 pianohackr|work Some drunken weather god at the controls this winter... 20:45 pianohackr|work You know, here in colorado of all places it was _60°_ a month ago 20:45 jwagner chris_n, don't say that too loudly -- the metro area is running out of places to pile up all the snow that's been scooped up off the streets. They might be willing to send it to you :-) 20:44 pianohackr|work anyway, hi chris_n 20:44 pianohackr|work my current one has a giant enter key shoving up the backslash, it may well drive me mad 20:44 chris_n pianohackr|work: heya 20:43 chris_n brendan: they say if you don't like the weather in NC just wait a minute 20:43 chris_n we'll take all the snow you want to send us jwager :-) 20:43 Ropuch 'design award winner' keyboard, I have been warned ;> 20:42 Ropuch pianohackr|work: yep 20:41 pianohackr|work Ropuch: tiny keyboard changes are the root of all evil 20:41 Ropuch Instead of 'show' one option of munin ;> 20:41 Ropuch Mayve it's 'set' the weather of 20:39 jwagner chris_n, you're not planning to send any of that winter storm up our direction are you? We don't want it! 20:39 brendan geeze chris_n it seems that everytime you check the weather it's either flooding or winter storms 20:39 munin brendan: The current temperature in Northwest Goleta, Goleta, California is 15.5�C (12:32 PM PST on February 12, 2010). Conditions: Clear. Humidity: 71%. Dew Point: 10.0�C. Pressure: 30.12 in 1019.9 hPa (Falling). 20:39 brendan @wunder 93117 20:38 munin chris_n: The current temperature in Erwin, North Carolina is 2.0�C (3:21 PM EST on February 12, 2010). Conditions: Clear. Humidity: 41%. Dew Point: -10.0�C. Windchill: 2.0�C. Pressure: 29.89 in 1012 hPa (Steady). Winter Storm Warning in effect until 10 am EST Saturday... 20:38 chris_n @wunder 28334 20:28 Ropuch home/end/pgup/pgdn are tiny and above numeric pad, just below power button 20:27 Ropuch Uh, I can't get used my new laptop keyboard 20:27 * wizzyrea goes back in her hole. 20:26 wizzyrea never their fault. 20:26 wizzyrea it's always something wrong on my end ;) 20:26 * wizzyrea provides hosting for this site 20:26 wizzyrea "But it works in the library!!! It must be my website..." 20:25 wizzyrea no, it's not surprising, it's just amusing to me 20:25 Ropuch It's not that suprising, some time ago some student emailed me 192.168. adress with question, so ;> 20:24 * wizzyrea facepalms 20:24 chris_n heh 20:24 Ropuch :) 20:24 wizzyrea >.> 20:24 wizzyrea yea, honey, that won't work 20:24 wizzyrea I'm at home 20:24 wizzyrea are you inside or outside of your own network 20:24 Ropuch um... 20:24 wizzyrea http://192.168.1.21/therestofit 20:23 wizzyrea ./me looks at the link 20:23 wizzyrea library just emailed me: I can't get my catalog link to work 20:23 * wizzyrea is amused 20:21 Ropuch Oh 20:21 wizzyrea nah, actually tidy was causing almost all of the problems 20:20 wizzyrea yea, i'm working on it (not right this very second, but it is on my list) 20:20 Ropuch I guess it's another lame-regexp thing 20:20 Ropuch http://koha-community.org/documentation/3-2-manual/?ch=x3991#AEN4101 20:20 Ropuch wizzyrea: nengard told me about some documentation issue 20:17 wizzyrea gmcharlt++ for fixing the bulk item editor 20:14 schuster_32 Yeah that was my next attempt to take just a few to make sure it wasn't an import problem. 20:13 gmcharlt but in practice, try splitting up the import file 20:13 gmcharlt schuster_32: there's an Apache config setting to can change the timeout 20:12 schuster_32 error from error log - for borrower import - Timeout waiting for output from CGI script /usr/share/koha/intranet/cgi-bin/tools/import_borrowers.pl, referer: 20:09 gmcharlt schuster: after about 10 minutes? 20:09 schuster Is there someplace to change the timeout length? 20:09 schuster Anyone try with 3.2 to load a LARGE batch of borrowers? I'm getting a cgi script timeout message in the koha logs. and the web page goes to a 404. 20:04 schuster The scarry thing is I have family member with "ice houses" for Ice fishing... Some of them are nicer than their living rooms. 19:55 munin cait: The current temperature in Taegerwilen, Germany is -6.9�C (8:51 PM CET on February 12, 2010). Conditions: Overcast. Humidity: 88%. Dew Point: -9.0�C. Windchill: -7.0�C. Pressure: 30.01 in 1016.1 hPa (Steady). 19:55 cait @wunder Konstanz 19:54 munin cait: The current temperature in Hannover, Germany is -4.0�C (8:20 PM CET on February 12, 2010). Conditions: Light Snow. Humidity: 86%. Dew Point: -6.0�C. Windchill: -9.0�C. Pressure: 30.06 in 1018 hPa (Steady). 19:54 cait @wunder hannover, germany 19:51 jdavidb The fish in my freezer don't put up much of a fight. Easy sport; my kinda sport. 19:50 jdavidb lol 19:48 jwagner You mean you can't fish for ice cubes in the freezer? 19:48 jdavidb My tale is not uncommon for persons who attempt ice-fishing in Dallas. 19:48 moodaepo jdavidb: Nice. I have to say I am an expat from Chicago and have not gone ice fishing in the 5 years I'm been round these parts. Might do it just to tell the city folks I've done and gone native : ) 19:46 jdavidb moodaepo: The one time I went ice fishing, I kept hearing this loud voice, every time I'd get ready to cut into the ice, saying, "There are no fish under the ice..." I finally said, "Lord, if they're not here, where are they?" and the voice replied, "This is not God. This is the rink announcer... 19:46 jwagner In the parking lot, a truck with a sign on it reading "Underwater Recovery Specialists" 19:46 jwagner Speaking of ice fishing, one of my most cherished memories of wandering around Maine in late winter was a parking lot next to a lake. Lots of vehicles out on the frozen lake with people ice fishing. 19:45 moodaepo heh 19:44 jwagner I used to live in Boston, & spent a lot of time in Maine. There's a saying I've heard about both Maine and Minnesota: 40 below keeps the riffraff out! 19:44 cait jdavidb: brrr! 19:44 * moodaepo thinks jdavidb showuld come up north and go ice fishing 19:44 jwagner Nope, not moving to Minnesota any time soon... 19:43 munin moodaepo: The current temperature in Mankato, Minnesota is -10.0�C (1:35 PM CST on February 12, 2010). Conditions: Clear. Humidity: 93%. Dew Point: -11.0�C. Windchill: -14.0�C. Pressure: 30.03 in 1017 hPa (Steady). 19:43 moodaepo @wunder 56001 19:43 * jdavidb thinks he likes it better in Maryland than in Konstanz. Brr! 19:38 munin cait: The current temperature in Taegerwilen, Germany is -6.8�C (8:31 PM CET on February 12, 2010). Conditions: Overcast. Humidity: 88%. Dew Point: -8.0�C. Windchill: -7.0�C. Pressure: 30.01 in 1016.1 hPa (Steady). 19:38 cait @wunder Konstanz 19:33 munin jwagner: The current temperature in Hollywood, College Park, Maryland is 3.4�C (2:30 PM EST on February 12, 2010). Conditions: Clear. Humidity: 50%. Dew Point: -6.0�C. Windchill: -1.0�C. Pressure: 29.89 in 1012.1 hPa (Rising). 19:33 jwagner @wunder 20740 18:51 munin wajasu: The current temperature in Sebastian Construction Group - Beverly Drive Jobsite, Highland Park, Texas is 2.8�C (12:48 PM CST on February 12, 2010). Conditions: Overcast. Humidity: 84%. Dew Point: 0.0�C. Windchill: 3.0�C. Pressure: 29.90 in 1012.4 hPa (Steady). 18:51 wajasu @wunder 75214 18:50 cait :) 18:47 * jwagner looks around. Yes, I'm still here :-) 18:46 wizzyrea I think you're farewelling the wrong party, joetho 18:42 joetho What coulda been. 18:42 joetho goodbye, dear PTFS 18:42 moodaepo whatever 18:41 joetho breaking up just a few days before Valentines Day is just awful. 18:07 gmcharlt lol 18:04 cait :) 18:04 cait hi wizzyrea 18:04 wizzyrea hi cait 18:04 cait hi all 18:03 wizzyrea timing, we has it 18:03 wizzyrea wow 18:03 wizzyrea heh 18:00 nengard just finished recording the Feb edition of the Library 2.0 Gang and John Yokley was our guest to talk about the future of the open source ILS - keep an eye out for it here: http://librarygang.talis.com/ 17:55 * collum had to go to wfaa.com to see if it was his alma mater. It wasn't. 17:46 jwagner But you learn more about life during a snowball fight than you do in a classroom :-) 17:46 schuster One high school yesterday in Dallas they called the cops to stop the 400 kids and the snowball fight they were having. They couldn't get the kids back into the school to go to class. 17:38 moodaepo gmcharlt++ #EXTERMINATE! EXTERMINATE! 17:31 jwagner gmcharlt, where's the Doctor when you need him??? 17:26 jdavidb lol! That looks unpleasantly like some of our Congresspeople. 17:25 wizzyrea gmcharlt: awesome 17:25 gmcharlt schuster: to say nothing of snow Daleks - http://www.boingboing.net/2010/02/10/snow-dalek-attacks.html 17:24 munin jdavidb: The current temperature in Flower Valley, Rockville, Maryland is 2.7�C (12:13 PM EST on February 12, 2010). Conditions: Clear. Humidity: 65%. Dew Point: -3.0�C. Windchill: 3.0�C. Pressure: 29.67 in 1004.6 hPa (Steady). 17:24 jdavidb @wunder 20852 17:24 munin moodaepo: The current temperature in Mankato, Minnesota is -12.0�C (11:15 AM CST on February 12, 2010). Conditions: Mostly Cloudy. Humidity: 100%. Dew Point: -12.0�C. Windchill: -16.0�C. Pressure: 30.06 in 1018 hPa (Steady). 17:24 moodaepo @wunder 56001 17:24 jdavidb I hear there are all sorts of snowpeople on the National Mall right now. Big open space, tons of wet sticky snow. Someone apparently even built a snow Capitol. 17:22 munin schuster: The current temperature in Brookview, Plano, Texas is 2.7�C (11:15 AM CST on February 12, 2010). Conditions: Overcast. Humidity: 91%. Dew Point: 1.0�C. Windchill: 3.0�C. Pressure: 29.47 in 997.9 hPa (Falling). 17:22 schuster @wunder 75074 17:22 schuster Great snow for making snowpeople etc... Not cold just wet and sticky. But tonight it is supposed to FREEZE again so tomorrow morning will be bad but almost 50 tomorrow afternoon. 17:18 * chris_n watches everyone quitting 17:17 gmcharlt hi Ropuch 17:17 Ropuch Hi brendan 17:16 brendan good evening Ropuch 17:15 Ropuch Evening everybody 17:15 Ropuch Woo-hoo, I've got new laptop 17:11 jwagner At least schuster knows how we feel, now. (Yes, I know you're from up North, but time dulls those memories, right?) 17:11 wizzyrea in Texas! 17:11 wizzyrea 12.5in! 17:11 wizzyrea schuster I'm amazedy you made it to work today 17:00 jwagner wizzyrea, my stress level is being affected in too many ways right now to notice a difference! 16:56 schuster 3.00.01.116 - was the about page version of what I pulled I think on Monday from HEAD. 16:55 schuster question - so I "upgraded" my .42 database to 3.00.01.116 yesterday and it sucked up 6 gig of space on this little laptop of mine. Will I gain any of that back as I'm almost out of HD space now. 16:50 wizzyrea jwagner: did your stress level go way down :) 16:38 kf ok, time to leave here :) have a nice weekend all! 16:22 schuster you should be able to just drop it into the cron directory and make it go... 16:22 jwagner Not set up for it yet, schuster, but I'll look forward to it. 16:21 schuster FYI it runs on 3.00.042 if anyone is interested in playing with it jwagner... 16:21 schuster anything in /kohaclone/ is web accessible so that is where we dropped it on my server. 16:20 schuster I was wondering about if we did that we could actually add the file name etc... to the koha tools page for easier access or let the admin tell the cataloger where to find the file? 16:19 schuster yes - remember this is a cron job so the person doing the cron can assign it -htmldir=/kohaclone/koha-tmpl/..../checkforbadurl.html 16:18 jwagner schuster, you're talking about the default of where to put the output? I'd suggest someplace that's normally web accessible, like somewhere under the koha-tmpl tree. 16:18 schuster then once it completes you can go to http://localhost:8080/checkurl.html - to see the output with links to the bib. 16:17 schuster -htmldir=/kohaclone/ tells the pl where to put the output and the checkurl.html - is the file it creates you can name it whatever you want. 16:17 nengard got it 16:17 nengard OH! 16:17 schuster you indicate where you want the output to be put and filename. perl check-url.pl -html -htmldir=/kohaclone/checkurl.html -host=http://localhost:8080 16:16 nengard okay - but i haven't gotten it to work yet ... 16:16 schuster nengard - check-url.pl question - 16:14 kf chris_n: there are many maddening things with notices and fines :( 16:14 chris_n borrower_message_preferences looks like it could get big fast 16:07 munin jwagner: The current temperature in Hollywood, College Park, Maryland is 1.8�C (11:04 AM EST on February 12, 2010). Conditions: Clear. Humidity: 59%. Dew Point: -5.0�C. Windchill: 0.0�C. Pressure: 29.96 in 1014.4 hPa (Rising). 16:07 jwagner @wunder 20740 16:04 munin brendan: The current temperature in Northwest Goleta, Goleta, California is 8.1�C (8:01 AM PST on February 12, 2010). Conditions: Clear. Humidity: 83%. Dew Point: 5.0�C. Windchill: 8.0�C. Pressure: 30.18 in 1021.9 hPa (Rising). 16:04 brendan @wunder 93117 16:03 schuster Thoughts about where this page should live? We dropped it in /kohaclone/ directory - but based on the .pl we left that up to whoever is setting it up to direct the output and filename. 16:00 * chris_n finds it a bit further maddening that there are two messaging modules in the code :-P 15:59 schuster Being a newb - I will comment to our programmer about the comments, but I am not sure he will know how to handle the request. Hmmm now I can see an edit on the cataloging page with a link to the document if it exists. 15:57 schuster gmcharlt - thanks I've commented back. 15:56 jwagner Yippee! I think my desktop is back up. Back in a few. 15:56 kf chris_n: I dont think you can use one interface - for example I think there is dev for itemtype instead of patron category - so it would not work as a standard setting for patron category 15:54 jwagner My biggest gripe is with the SMS option always showing. If it's there, patrons think it's functional, but it requires additional setup on the staff end & library may not want to use it at all. 15:53 chris_n why not have the messaging on always and default to do not send? 15:51 jwagner It really does annoy me that you have to have Enhanced Messaging on just to be able to send emails when holds are triggered. Even if you don't want to use the other stuff like SMS, advance notice, etc. 15:51 chris_n this interface is *much* less confusing than the overduerules.pl interface 15:51 chris_n I meant all messaging be rolled into one 15:51 * jwagner starts singing Wreck of the Old '97.... 15:50 chris_n jwagner: sorry, I jumped trains of thought there 15:50 * jwagner redirects my cursing to Pepco -- they apparently cut the power to our building for a while. 15:49 jwagner That's just a display on/off switch for the OPAC, doesn't do anything substantive on staff side. 15:49 jwagner chris_n, you mean into the OPAC tab code? I think that should probably be kept separate. 15:49 wizzyrea chris_n I think I"m with you on that 15:48 chris_n errr... code for messaging in general that is 15:48 chris_n imho it seems that overdue notices could be wrapped up in the same code 15:46 jwagner Meowwwwww 15:46 chris_n quick! another kitten on the floor! 15:44 jwagner I submitted the patch on August 17, looks like it never went anywhere. 15:43 munin 04Bug http://bugs.koha.org/cgi-bin/bugzilla3/show_bug.cgi?id=3535 enhancement, PATCH-Sent, ---, jwagner@ptfs.com, RESOLVED FIXED, Add syspref to control display of My Messaging tab in OPAC 15:43 jwagner Found the bugzilla entry -- Bug 3535 and it looks like the patch file is attached. 15:39 * jwagner curses and grumbles at our building mgt -- apparently there have been major electrical problems in the building this morning. 15:39 jwagner I found the syspref on one of my systems that has it loaded -- syspref is named opacmsgtab & controls whether or not the tab shows. But until I can get into my mail and desktop, I can't find the bug # or date I sent the patch. 15:38 chris_n jwagner: I cannot seem to find the bug, but would be interested in the patch 15:35 * kf grumbles a bit more 15:35 gmcharlt schuster: I see that fredericd added some comments to the bug regarding your check-url patch 15:35 gmcharlt schuster: yep -still looking at them 15:34 kf Calculate fines based on days overdue directly / not include the days the library is closed - so I cant deactivate the calendar to get fines on holidays? (this is what I wanted to do - so I can send out notices the same day as fine is charged - notices dont look for the calendar at all ) 15:34 nengard gmcharlt added 15:34 schuster gmcharlt - did you get my 2 patches? 15:33 kf hm I see that the description of finesCalendar is differnt now in head 15:32 jwagner If I ever get back into my desktop I'll check for the patch/bug # on it. 15:31 gmcharlt nengard: should add fredericd then, as he's the new translation manager 15:31 chris_n nengard: cool 15:31 nengard gmcharlt yes and no - i took your email summary of the irc meeting and put that in - that had some of the roles 15:31 kf but no patch there 15:31 munin 04Bug http://bugs.koha.org/cgi-bin/bugzilla3/show_bug.cgi?id=2434 normal, P3, ---, gmcharlt@gmail.com, NEW, Disable Enhanced Messaging Columns Not In Use 15:31 kf bug 2434 15:30 gmcharlt nengard: is there an item about the 3.4 project roles? 15:30 gmcharlt not sure that helps his communications department, though 15:30 jwagner gmcharlt, I'm trying to search bugzilla, not finding it right now. 15:29 nengard schuster - make it short and sweet - 1 para max is fine - not looking for a press type document 15:29 gmcharlt jwagner: if you find me the bug number ... 15:28 nengard chris_n -- http://git.biblibre.com/cgi-bin/gitweb.cgi?p=kohadocs;a=commit;h=34ac8a17c5756c40f17fc84a5fd0ea61e2da7cc4 15:28 gmcharlt agreed - the subsystem is just there, but patron may/may not have control 15:28 jwagner kf, yes I did a patch a while back, but it hasn't made it into head yet. I still can't get to anything -- search bugzilla for message tab or messaging tab. Don't remember if I attached the patch file to the bug report, probably not :-( 15:28 kf yes :) 15:28 chris_n ie. we will spam you with notices ;-) 15:28 chris_n only with the ability to control whether or not the patron has any say 15:28 kf but I think it works like it was supposed to atm :) 15:27 kf gmcharlt++ 15:27 chris_n gmcharlt++ 15:27 kf chris_n: we had software training all week - still reading mails and sorting through them right now 15:27 gmcharlt one could argue that it's time to get rid of EnhancedMessagingPreferences as a syspref and just leave it on 15:27 chris_n kf: yes, jwagner has submitted a patch I believe 15:27 * chris_n understands completely... friday is second only to monday 15:27 kf chris_n: I think ther is a bug for an opac setting, so that users cant / can change it in opac 15:27 kf chris_n: sorry - its friday. 15:26 kf kf: no, I think the setting activates / deactivates the feature, so it should not be there when off 15:23 schuster I doubt we will get one this month, but we can target for next month. It took us 5 months to get a press release out with LibLime... 15:23 schuster I've talked with my boss about a newsletter article - as politics go in red tape I will write one, but it has to go through the communications department before it can be released. 15:22 schuster ducks and pushes the snow covered car across the parking lot. 15:22 chris_n kf: does it not seem that the default messaging preferences table on cateogrie.pl should show regardless of the EnhancedMessagingPreferences setting? 15:22 nengard here 15:22 * jdavidb throws a snowball at schuster. 15:22 schuster nengard here? 15:22 schuster Ah - cable modem with Time warner happiness... 15:21 kf ah, / :) 15:21 * kf grumbling 15:21 * chris_n adds to the general grumbling 15:20 kf \me makes it collective grumbling 15:18 * jdavidb grumbles a collection of pejoratives and insults in two or three different languages, and includes the term "Verizon"... 15:18 kf will wait till monday and file a bug report with all details, curious what will happen on the weekend 15:15 kf I think fine intervals > 1 have some serious bugs or I just dont understand how its supposed to work 15:14 kf 2 days in a row... 15:13 kf :( I dont understand koha - i have fine interval 2 days and get fines to days in a row? 15:08 owen My library only closes if it's a "Level 3 snow emergency" as called by the county sheriff. Otherwise it's work or take a vacation day. 15:07 schuster for Dallas. 15:07 schuster "only" - largest single snowfall in history... 15:06 schuster No snowplows, very little sand - and still hovering around 32 degrees... won't melt until tomorrow... 15:06 owen "only" 12.5 inches schuster? 15:06 schuster Well only 12.5 inches of snow in Dallas - all schools/universities closed - but guess what I'm here at work or I have to take a day of vacation!!! 14:56 munin 04Bug http://bugs.koha.org/cgi-bin/bugzilla3/show_bug.cgi?id=3393 major, PATCH-Sent, ---, nahuel.angelinetti@biblibre.com, ASSIGNED, Default branches and overdues notices 14:56 gmcharlt the current patch for bug 3393 needs work, but once it's cleaned up and sufficiently tested, it can be pushed 14:52 gmcharlt that would be a regression (loss of functionality) 14:51 kf cant we just delete the default library from the template for 3.2? is really annoying if you dont know about the bug 14:41 gmcharlt it needs more thought and a new patch 14:38 chris_n ahh... so it needs to be revived 14:38 gmcharlt not that that prevented it from being pushed to 3.0.x *sigh* 14:37 gmcharlt chris_n: patch was questionable: http://lists.koha.org/pipermail/koha-patches/2009-July/003924.html 14:29 chris_n gmcharlt: this does not appear to have made it into HEAD: http://bugs.koha.org/cgi-bin/bugzilla3/attachment.cgi?id=897 14:26 nengard ah - k 14:25 chris_n just in case the usage docs are not in POD format 14:25 chris_n nengard: you can also try perl foo.pl --help 14:24 kf perhaps its working now, my last tests were with 3.1.61 14:24 nengard chris_n - on another note -- related to perldoc - looks like not all crons have docs :( "No documentation found for "rebuild_zebra.pl"." 14:24 munin 04Bug http://bugs.koha.org/cgi-bin/bugzilla3/show_bug.cgi?id=3393 major, PATCH-Sent, ---, nahuel.angelinetti@biblibre.com, ASSIGNED, Default branches and overdues notices 14:24 kf bug 3393 14:23 kf chris_n: there is already a bug for that 14:23 nengard chris_n - done 14:21 munin gmcharlt: The operation succeeded. 14:21 gmcharlt @later tell wizzyrea submitted patch for bug 4169 - would appreciate it if you could try it out before I push it 14:17 chris_n nengard: that would also be good to add to that bug 14:16 munin 04Bug http://bugs.koha.org/cgi-bin/bugzilla3/show_bug.cgi?id=4171 enhancement, P5, ---, cnighswonger@foundations.edu, NEW, overduerules.pl needs an overhaul 14:16 chris_n kf: please add that to bug 4171 14:16 kf and please remove default library or make it work! 14:15 nengard chris_n i think that originally the advanced notice was going to be handled by those triggers, but then it was added to the patron enahnced messaging moduel 14:15 jwagner nengard, the problem is that the triggers page allows selection of other types of notices, including advance notices, that aren't controlled by the overdues script 14:15 chris_n kf: I understand you just fine :) 14:15 kf chris_n: I m not always sure my english is really understandable 14:14 chris_n nengard: probably consulting with jwagner and kf will be better as my understanding is very poor atm 14:14 jwagner Sorry, my workmen are here so I got called away. I hope they get the VPN up soon :-( 14:13 nengard okay - i kind of go lost - what's the deal with the triggers? I think an easy fix is to remove the default advanced notice that's found in there - that at least solved part of the problem? right? 14:12 * jdavidb then turns the not into a note. 14:12 * jdavidb makes a not to go visit jwagner, and set her up a virtualbox sandbox or two or three. 14:11 chris_n kf: sometimes that is the easiest way to describe the issue :) 14:11 chris_n when mine is down, I have to drive about 30 mins to fix it :-P 14:11 kf ah, im quoted in bugzilla 14:11 * chris_n empathizes with jwagner 14:11 nengard jwagner you need to install virtualbox and then Koha on that - so you don't need vpn 14:08 * jwagner stamps my foot and pouts. I want my VPN connection back! 14:08 kf serials routing list and claim serial issues are already differnet modules, so its not really koha modules in this list 14:07 jwagner Then yes, kf, making a new notice modules just for overdues & having the notice triggers only show those would work. 14:07 chris_n I'm going to open two bugs then: one for the documentation and one for a general rework of overduerules.pl 14:06 kf i think it shows all from circulation 14:06 kf perhaps a new option for notices - module overdue notices and show only those on notice triggers page 14:06 jwagner Right. As I said, I'm not logged in right now so I can't look. Is there anything in the settings that says "this notice is for overdues" as opposed to "this notice is for circ stuff"? I don't remember. 14:05 kf jwagner: right. but its nice you can create as many notice templates as you want and choose there 14:05 chris_n so it sounds to me like the overduerules.pl page needs an overhaul 14:04 jwagner Ideally the notice triggers page should only filter/show overdue notices in the pulldowns. If that's not possible, at least some screen text about "this is only for overdue notices" 14:04 kf for overdue notices, days after due date 14:04 jwagner It's a documentation/screen display issue. 14:04 nengard right now you can pick it for anything 14:03 nengard chris_n - it should only be for overdue notices, but that's the part that needs fixing 14:03 kf advanced notice = before due date and item due = due date are handled in advanced messaging, overdue notices in notice triggers 14:03 chris_n so then what is the Delay field for on the overduerules.pl page? 14:02 jwagner If you edit the patron categories and set up your desired settings there for advance notice, holds, etc., then any time you create a new patron it will pick up the settings automatically. But there's no easy way short of a SQL update to modify existing records. 14:02 kf yes, or define the delay in patron type and import your new patrons after that :) 14:01 jwagner chris_n, the delay is set in the patron record -- the Enhanced Messaging section. You can do a global db update to set the same delay for everyone. 14:01 * chris_n is confused as to whether the functionality is broken or just the documentation 14:00 chris_n kf: so if I set up an advanced notice do I have to set a delay? 14:00 jwagner I don't think it's a blocker, necessarily, but it definitely needs more explanatory text. 14:00 kf I dont understand the problem 14:00 nengard unless I too am misunderstanding 13:59 chris_n a blocker imho 13:59 chris_n nengard: big bug then :) 13:59 kf advances notices are sent before due date 13:59 nengard chris_n - you are missing the point - the advanced notice shouldn't be on that triggers page at all cause it's handled on the enhanced messaging preferences on the patron record 13:58 kf overdue notices 13:58 chris_n kf: so if I want an advanced notice sent , it will not send until 1 day *after* the item is due? 13:58 kf but a hint would be good 13:58 kf which is ok, because you can also sent itemdue and advances notices 13:58 kf this is the day after due date 13:58 kf only with 1 for the first notice 13:57 kf got no notice when I tried with 0 13:57 chris_n kf: so the script does not process any notices with a delay of less than 1? 13:57 kf and dont use the default library - no notices will be sent 13:57 kf minimal value is 1 13:57 kf ah ok, there are some other bad things about notice triggers 13:56 chris_n kf: we were just discussing the confusing help and general text in overduerules.pl 13:55 kf kf: testing them right now in all different combinations 13:55 chris_n including general announcements 13:55 kf chris_n: i can help with questions about overdue-notices 13:54 chris_n but in reality handles several types of notifications 13:54 chris_n of course the entire page is confusing as it claims to be defining overdue actions 13:53 chris_n which is, in fact, only true for overdue notices 13:53 nengard that i can fix, but we have a bigger issue as well 13:53 chris_n nengard: the issue is that the help on the overduerules.pl page incorrectly implies that the Delay field value is necessary for any notice to be processed 13:52 jwagner The patron messaging settings control whether/how many days a patron gets an advanced notice, whether the patron gets an email for holds triggered, etc. 13:52 nengard so that the other notices can't be selected from the triggers page 13:52 jdavidb Mornin', owen. :) 13:52 nengard if that's the case then we need a bug 13:51 jwagner All the notice texts live under notices, but the notice triggers only are used for overdues. Somebody check me on that, but I think its right. 13:51 nengard cause isn't advanced notice handled by the patron using enhanced messages? 13:51 nengard the notice triggers? 13:51 nengard wait - what page are we on ... 13:51 jwagner The delay is only used for the overdue notices, so far as I know. 13:50 nengard and the help 13:50 nengard so - delay is used for all but advanced notice? I can put that in the manual 13:50 nengard hmmm 13:49 chris_n or maybe I should open a bug for that? 13:49 chris_n nengard: you might want to note that so the help can be corrected 13:49 jwagner Morning, owen 13:48 owen Hi all 13:48 jwagner Sorry, we lost our VPN connection for the moment, so I can't look, but check misc/cronjobs for the script. It needs to be cronned, and the # days set in the patron record. 13:48 chris_n jwagner: so contrary to the help file, the advanced notice will be sent if the delay field is empty? 13:48 jwagner chris_n, the advance notice doesn't use the notice triggers. Separate script. 13:48 chris_n not quite advanced notice in my thinking 13:48 chris_n then the advanced notice is not sent until 1 day after the item is due 13:47 chris_n and I set a delay of 1 day 13:47 chris_n so if I want to send an 'Advance Notice of Item Due' 13:47 chris_n and a Delay value is required for the trigger to work 13:47 chris_n the help says: Delay is the number of days after an issue is due before an action is triggered. 13:46 kf hi all 13:46 chris_n question about the Notice Triggers logic 13:43 nengard hehe 13:40 chris_n for a minute I thought we were at the end ;-) 13:40 gmcharlt nengard: have a free punctuation mark - use it well 13:40 gmcharlt oops 13:39 gmcharlt . 13:39 chris_n it is extremely helpful 13:39 * chris_n has been using the manual quite a bit the last few days 13:39 nengard np 13:39 chris_n great, tnx! 13:38 nengard can/will do 13:38 nengard k 13:38 chris_n the output 13:38 nengard you want me to put the command to the perldoc? or the actual text from it? I can do either 13:38 chris_n etc 13:38 chris_n perldoc overdue_notices.pl 13:38 chris_n ie 13:38 chris_n perhaps including the info from perldoc on each script would be beneficial 13:37 chris_n in the cron jobs section 13:37 nengard yes? 13:37 chris_n nengard: I've a suggestion for the manual 13:37 nengard hehe :) 13:37 chris_n ahh... I'm not sure 13:36 chris_n intranet-tmpl 13:36 chris_n opac-tmpl 13:36 nengard http://wiki.koha.org/doku.php?id=en:development:check-url_enhancements 13:36 nengard to where ?? :) 13:35 chris_n nengard: I'd guess it walks down that dir structure starting at that point 13:35 nengard but i don't see an html file in the koha-tmpl directory ... 13:34 nengard perl check-url.pl ?html ?htmldir=/kohaclone/koha-tmpl ?host=http://localhost:8080 13:34 joetho hello, testing 13:34 nengard got a question about the url checker - i read the wiki page and I did this: 13:33 chris_n magnus: I'm not sure about pulling 13:32 chris_n git rebase origin 13:32 chris_n after committing all work then 13:32 chris_n git commit 13:32 chris_n git add foo.pl 13:32 chris_n hilongo: if you have done work, you will need to commit it first 13:29 hilongo thanks chris_n .. I have modified some files and git tells me that they need update... did that stopped the process? how do I know if it worked? 13:26 magnus ...unless you have branches you are working on etc 13:25 magnus doesn't "git pull" do the same thing? 13:21 chris_n git rebase origin 13:21 chris_n then 13:21 chris_n hilongo: git fetch 13:18 hilongo a very newbie question ... how do I update my kohaclone with git? 13:15 hilongo not that I'd want to presume ... but it's nice weather here :) 13:14 munin hilongo: The current temperature in Mendoza Aerodrome, Argentina is 26.0�C (9:00 AM ART on February 12, 2010). Conditions: Scattered Clouds. Humidity: 50%. Dew Point: 18.0�C. Pressure: 29.76 in 1008 hPa (Rising). 13:14 hilongo @wunder Mendoza, Argentina 13:13 hilongo good morning everyone :) 13:13 munin jdavidb: The current temperature in Flower Valley, Rockville, Maryland is -1.9�C (8:03 AM EST on February 12, 2010). Conditions: Clear. Humidity: 71%. Dew Point: -6.0�C. Windchill: -5.0�C. Pressure: 29.68 in 1005.0 hPa (Steady). 13:13 jdavidb @wunder 20852 13:11 munin chris_n: The current temperature in Dunn, North Carolina is -1.3�C (8:08 AM EST on February 12, 2010). Conditions: Clear. Humidity: 23%. Dew Point: -18.0�C. Windchill: -1.0�C. Pressure: 29.68 in 1005.0 hPa (Steady). Winter Weather Advisory in effect from 5 PM this afternoon to 10 am EST Saturday... 13:11 chris_n @wunder 28334 13:11 chris_n g'morning 13:09 toins hello world 13:05 nengard getting ready for the publication of the newsletter on the 15th 13:05 gmcharlt cool 13:05 nengard I have just set up the newsletter page to redirect to the new koha-community site - just an FYI :) 12:43 jwagner Morning. I think. 12:40 jdavidb mornin', jwagner. 12:39 jdavidb Maybe. Shouldn't be too bad right here where I am; steep hills and a creek at the bottom to run it all away. 12:39 Colin floods later then 12:38 jdavidb Still in big piles all around the house. I'm hoping for some melting today. 12:37 Colin morning jdavidb how's the snow? 12:36 jdavidb Mornin', #koha. 12:10 Colin gmcharlt: I'll submit a patch 12:10 gmcharlt Colin: sounds good to me 12:09 Colin gmcharlt: In Makefile.PL authorities indexing mode defaults to grs1 elsewhere we recommend dom should this change? 11:44 gmcharlt greetings #koha 10:10 slef I wonder if it means that PTFS offered less than would clear Metavore's financing http://www2.sos.state.oh.us/pls/portal/PORTAL_BS.BS_QRY_FINANCING_NUMBER.SHOW?p_arg_names=fsn&p_arg_values=OH00121149535 10:05 slef basically 10:04 magnus well, i jyst thaought they couldn't agree on the price... 10:04 slef magnus: not yet, but I will if you want. ;-) 10:03 magnus slef: no, have you? ;-) 10:00 slef Morning all. Anyone speculated what "could not agree upon financial terms" means yet? 07:53 brendan night 07:48 munin bigbrovar_: The current temperature in Abuja, Nigeria is 24.0�C (7:00 AM WAT on February 11, 2010). Conditions: Haze. Humidity: 65%. Dew Point: 18.0�C. Pressure: 29.86 in 1011 hPa. 07:48 bigbrovar_ @wunder Abuja 07:01 munin Ropuch: The current temperature in Wroclaw, Poland is -5.0�C (7:30 AM CET on February 12, 2010). Conditions: Light Snow. Humidity: 93%. Dew Point: -6.0�C. Windchill: -10.0�C. Pressure: 29.80 in 1009 hPa (Rising). 07:01 Ropuch @wunder Wroclaw 06:59 munin brendan: The current temperature in Northwest Goleta, Goleta, California is 9.7�C (10:53 PM PST on February 11, 2010). Conditions: Clear. Humidity: 80%. Dew Point: 6.0�C. Windchill: 10.0�C. Pressure: 30.15 in 1020.9 hPa (Rising). 06:59 brendan @wunder 93117 06:59 brendan morning Ropuch 06:58 Ropuch Morning #koha 06:28 brendan http://git.koha.org/cgi-bin/gitweb.cgi?p=Koha;a=blob;f=INSTALL.fedora7;h=7393958c8bd409a618de96da415143df9270fbd6;hb=HEAD 06:28 wizzyrea_laptop :P 06:28 wizzyrea_laptop replace that debian-lenny with fedora 06:21 shamas i want for fedora 06:21 shamas fedora 06:08 brendan that's for debian linux 06:08 brendan http://git.koha.org/cgi-bin/gitweb.cgi?p=Koha;a=blob;f=INSTALL.debian-lenny;h=da6c023ba8dba266120e17e9906bca4f34687e93;hb=HEAD 06:07 brendan what type of linux? 06:06 shamas can any one give me any link for koha installation tutorial on a linux based web server on a domain 04:24 brendan night jo 04:24 Jo nigt all 04:16 munin brendan: The current temperature in Northwest Goleta, Goleta, California is 11.8�C (8:11 PM PST on February 11, 2010). Conditions: Clear. Humidity: 77%. Dew Point: 8.0�C. Pressure: 30.14 in 1020.5 hPa (Steady). 04:16 brendan @wunder 93117 04:06 Jo thanks. 04:01 gmcharlt New Jersey 03:59 Jo where does nicole live 03:58 braedon|work but that has it's own issues 03:57 braedon|work some of which cpanp seems to be able to solve 03:57 braedon|work cpan just gives SO many stupid issues 03:57 braedon|work i really should chuck together a ppa of the cpan ones 03:56 gmcharlt and thus the circle of life continues 03:53 braedon|work and then they will break again 03:53 braedon|work until someone updates something 03:50 braedon|work but they seem to be working for me now 03:50 braedon|work it was bit of a mish to track those down 03:50 braedon|work :) 03:48 gmcharlt tracking deps is a never-ending task - every bit helps 03:48 gmcharlt braedon|work: yes 03:48 braedon|work gmcharlt: do those lists of modules i added to the bug look ok/remotely useful? 03:34 Jo yippee 03:31 gmcharlt it'll be there 03:31 Jo so hoping 3.2 stable will be available 03:30 Jo I'm very excited... we really have to go live march / april 03:30 Jo yep - nods frantically :) 03:30 gmcharlt it's worth the wait :) 03:30 Jo we were going to upgrade to 3.0 but decided to wait for 3.2 03:29 Jo yep - i'm playing in 3.2 config now 03:29 Jo well - actually a 2.2.9 live, a 3.0.x test site and a 3.2 playground 03:29 gmcharlt the LTFL setup is even easier in 3.2 03:29 gmcharlt cool 03:29 Jo yep but we have 3.2 we are playing on 03:28 gmcharlt HLT is running a 3.0.x now, right? 03:28 Jo may have to file a work request for chris that "i want one like that" 03:27 Jo thankyou 03:27 Jo oh :) 03:26 gmcharlt if I understand correctly 03:26 Jo what does IIUC mean ? 03:25 brendan I think they LT have methods for that updates being very quick... so not too far behind 03:25 gmcharlt Jo: http://www.librarything.com/wiki/index.php/Koha 03:25 brendan thinking that you are correct with your U gmcharlt 03:25 Jo it can't do it on the fly? 03:24 Jo but it would be permanetly out of date ... 03:24 gmcharlt IIUC, in order to be able to jump from LTFL tags to bibs in your Koha catalog, you send LT a dump of your MARC records or a list of the ISBNs that you have 03:23 Jo yep - just discovered the enhanced content sys admin tabs and working through seeing i might like to have 03:23 gmcharlt in 3.2, that is 03:23 gmcharlt the LTFL for libraries support is definitely in there 03:23 * brendan thinks parts of have been shared 03:22 Jo shared (sorry nursing a very sore hand and typing is crap) 03:22 Jo i wonder if itsstraight forward 'koha 3.2' out of thebox. has their code been shred? 03:21 gmcharlt yep, EBPL was among PTFS' first 03:21 Jo and that tag cloud and ability to 'hop' about the koha catalogue is what I'm after. 03:21 brendan cool 03:21 Jo its using both syndetics and library tghing tags: https://librarycatalog.ebpl.org/cgi-bin/koha/opac-detail.pl?biblionumber=59230 03:21 brendan I think they are one of PTFS's first ones 03:21 brendan no 03:21 Jo Brendan: is east brunswick one of your libraries? 03:13 Genji hmm.. sounds like i should code two new subroutines in Search.pm 03:07 gmcharlt yep 03:05 Genji so, search.pl first getResultSize($query) then if $offset is within $size, getRecord query 1 until resultsperpage and if results per page isn't filled by query 1's results, get query 2's results.. until is resultsperpage.... if query 1 is under offset, or has no results, use query 2, by offset until resultsperpage.... this right? 02:54 Jo syndetics data as enhanced content looks amazing ... 02:53 Genji right. 02:53 gmcharlt right - get the result set size for a query (without fully processing it) would need to be a new function 02:51 Genji hmm.. getRecord does its own offsetting though. 02:50 gmcharlt once you do that, the merge of the result sets becomes trivial 02:50 gmcharlt then issue one or two separate calls to getRecords 02:49 gmcharlt see if that falls in the desired search offset 02:49 gmcharlt in order to it via separate queries, you'd have to get the number of hits from the first query 02:48 gmcharlt which gets us back to one of my earlier suggestions, which is seeing if you can create appropriate sort indexes so that you can create a single query that puts the records you want first 02:47 Genji ya. but the offsetting happens inside getRecord itself. while looping through the results. 02:42 gmcharlt append the results of one query after the other, right? 02:40 Genji well.. its not server 1.. server 2 for me.. its query 1 + query 2. 02:39 Genji hmm.. i actually want to combine the results, server 1 + server 2, and then do the ofsetting and results per page.. 02:37 gmcharlt as $results_hashref (after line 481) 02:36 gmcharlt Genji: and actually, getRecords is doing that for you anyway 02:32 gmcharlt i.e., build an array to start the $results_hash that you want associated with each connection 02:32 gmcharlt if you want to split the output by server, what you can do is either include the server index ($i) as part of the data stracture that you stick th eresults into 02:30 gmcharlt and you still want to pull them in asynchronously for efficency 02:30 gmcharlt that you are started to receive them, yes 02:28 Genji okay... im confused... it says asyncrounously retrieve results... means that the results are already in by this stage? 02:26 Genji right. so if i want to process server 1 first, i just do the while loop until $i=1? 02:25 gmcharlt and the code happens to open the connections in the same order as @$servers 02:25 gmcharlt it's one-to-one - the routines in C4::Search open one connection per defined server that it's searching 02:23 Genji so zconns[$i] is the same connection as $servers[$i]? 02:19 gmcharlt the asynchronous applications section of perldoc ZOOM is pretty through 02:18 gmcharlt the return value is the index into the array of connections of the connection that has the most recent event ready to process 02:17 gmcharlt ZOOM::event is checking the connections passed to it for events 02:17 gmcharlt Genji: that's what ZOOM::event does - if you look (e.g.,) at around line 401 of C4/Search.pm 02:16 * wizzyrea_laptop is done now 02:16 wizzyrea_laptop (unless of course we see the code, then things might be different) 02:16 Genji gmcharlt: how? 02:15 gmcharlt Genji: if you're firing of multiple queries simultaneously, you can tell which connection a ZOOM::event is associated with 02:15 wizzyrea_laptop I guess now that we know we don't have to guess at what is going to happen now, so we can move on our happy path of kicking lek's arse 02:14 wizzyrea_laptop shinies! 02:14 Genji i would be basically rewriting/reorganizing getRecord... 02:13 wizzyrea_laptop ooh! 02:13 gmcharlt actually, no - we decided to talk about something useful and discussed enhanced content services for a bit ;) 02:13 Genji what if i move all the record retrieval into one lump... and then I process it? instead of getRecords record retrieval and process at the same time? 02:12 wizzyrea_laptop much wailing and gnashing of teeth? 02:10 chris_n you just missed out on all the long discussions 02:08 wizzyrea_laptop very quiet, surprising really 02:02 Genji is there any method of figuring out what server query caused a zoom::event? 01:59 Jo that would be amazing 01:56 brendan adding it to the list ;) 01:56 gmcharlt brendan: build it, and we'll get Evergreen catalogs in as well ;) 01:56 collum_ if left up to the patrons. 01:56 brendan for koha catalogs 01:56 collum_ Yep. I'm not sure we would ever get enough tags to be useful. 01:56 brendan could be a cool koha-community.org project to build a shared tag's database 01:55 gmcharlt certainly critical mass is the biggest problem with tagging in library catalogs 01:55 gmcharlt Jo: that's one of the things that SOPAC integration could help with - sharing tags among libraries 01:55 brendan well hoping that most things are dynamic 01:55 brendan but that was my understanding awhile ago... I guess all things are dynamic 01:54 collum_ Ahh. 01:54 brendan IRC 01:54 brendan collum_ it as javascript addition that calls from the lirbarything servers based on ISBN# 01:54 Jo its the tags really . i don't think the public use them anywhere near as much as they should and if we imported a 'set' it would demonstrate how powerfuil they are 01:53 gmcharlt brendan: yes, right now it would 01:53 brendan but it would show all sources of covers correct... not just the one where it matches 01:53 gmcharlt collum_: they're not indexed or loaded into Koha's own tag system afaik 01:53 gmcharlt but more likely to combine differents types of enhanced content 01:53 collum_ Do LibraryThing tags come over into Koha? 01:52 gmcharlt in the case of cover images, to pull together multiple sources 01:52 gmcharlt potentially you might want to mix and match 01:52 * chris_n notes cool new tweaks in additem.pl 01:52 Jo ie would you have syndetics + google or just one or the other? 01:51 Jo so would you ever have more than 1 on these enhance content 'services' tunred on. 01:51 collum_ Yep. Nice tutorials. 01:50 Jo oh thanks - off playing 01:48 brendan http://mtpl.org/renew.html 01:48 brendan whops 01:48 brendan https://librarycatalog.ebpl.org 01:48 brendan ah I like the tutorials found from that website collum_ 01:46 collum_ Here's one with syndetics http://mtpl.ptfsinc.com/cgi-bin/koha/opac-main.pl 01:46 Jo my laptop quit (has a brain of its own and refuses to types 'O' anymore 01:46 Jo I havn't quit 01:44 * chris_n discovers folding in vim and is an even happier camper 01:43 brendan https://librarycatalog.ebpl.org 01:43 Jo apparently Waimakiriri here in nz have it but i can't see it when i saercah their catalogue. 01:43 Jo well as a new convert to library thing for my home library, it is pretty cool aka a real time ewaster :) 01:42 gmcharlt it can be useful, yes, particularly with the LibraryThing stuff 01:41 brendan wonders if I know of one with it turned on 01:41 brendan hmm.. have you seen a catalog with it turned on? 01:41 Jo ie worth the price 01:40 Jo does anyone have an urge to tell me how good and useful turning on library thing or syndetics is for enhanced content in koha 01:40 Jo yep 01:38 gmcharlt Jo: at least it makes it crystal clear who you're negotiating with 01:38 chris_n truth 01:37 brendan totally agree Jo 01:37 brendan koha-community.org++ 01:37 Jo bye Nicole 01:37 Jo lucky we weren't holding our breath for koha.org to come back to us :) 01:37 nengard k - time to go spend time with hubby - see you all tomorrow! 01:35 gmcharlt more like de-obfuscation 01:33 chris_n obfuscation you mean? 01:32 jdavidb lol 01:32 gmcharlt perltidy-- # where's the mode to break up functions that are 323 lines long? 01:31 gmcharlt perltidy++ # yay, readable code 01:30 brendan heh 01:30 richard gosh 01:28 * richard reads the news 01:27 * chris_n thought refusing to support community features was a bad sign 01:25 gmcharlt russ++ 01:24 chris_n hehe 01:23 * russ gets on with useful stuff like updating the kohacon10 wiki 01:22 russ tune in next week when spidey says... 01:22 russ who knows 01:20 braedon|work so.. does that mean you guys aren't going to be getting koha.org back any time soon? 01:15 brendan heh -- i like to call it my daily soap-opera 01:14 russ it is all fun and games in koha land :-) 01:14 jdavidb Ain't it, though. 01:13 chris_n what an interesting twist 01:10 nengard hi to all who don't usually see me at this hour :) 01:10 nengard hi gmcharlt 01:10 gmcharlt hi nengard 01:10 nengard http://www.liblime.com/news/acquisition-not-happening 01:10 nengard hi jdavidb - just read the news 01:09 * jdavidb waves to nengard 00:48 jdavidb My cell is a little dodgy for tetherin', but it works, mostly. 00:48 brendan heh 00:48 jdavidb :) 00:47 brendan bye 00:47 brendan cool 00:47 jdavidb Cell-phone tetherin. 00:47 brendan you jumping on some neighbors wifi? 00:46 brendan bummer about the DSL 00:46 jdavidb yep. 00:46 brendan but getting some reading done is always nice 00:46 jdavidb Oh, yeah. We had power by sunday night. My DSL is still down, tho. 00:46 brendan sounded cold reading through the logs 00:46 brendan :) 00:46 brendan hoping that heat has returned for you 00:46 jdavidb Hi, brendan. 00:46 brendan howdy jdavidb 00:30 Genji hi? 00:28 gmcharlt alrighty then 00:21 pastebot "oqzANiIdgIhap" at 192.168.15.101 pasted "lglqJGmYPaMjcRnf" (1 line) at http://paste.workbuffer.org/115