Time  Nick          Message
22:31 huginn        TGoat: The operation succeeded.
22:31 TGoat         @later tell tcohen to please ping TGoat about building a kohadevbox
22:31 CrispyBran    Thanks
22:31 CrispyBran    Sounds good.
22:30 TGoat         I'll let you know when I am able to get tcohen to give me a little time. We can all Zoom together
22:29 TGoat         couldn't finish the download at the conference and I had to clear out the directory to start all over
22:28 TGoat         yea, that was the same for me
22:27 CrispyBran    Yes.  Felt like I got one step closer, then it took a nosedive.  Now I am trying to get a working box again.  I setup the SYNC_REPO.  Big mistake.  It was extremely slow and I could not apply patches.  Backing out of the SYNC_REPO is a chore.
22:25 TGoat         CrispyBran .. hate that.. I'm going to request some time with tcohen to get my kohadevbox all setup. Want to be added in
22:24 CrispyBran    Back to pulling out hair again
22:24 TGoat         CrispyBran are you lurking ;)
22:22 ibeardslee    .. sigh w/w
22:22 ibeardslee    as long as the opinions are the same as mine, all is good.
22:19 CrispyBran    magnuse: are you still around?
21:10 CrispyBran    I took the export line out of .bashrc, but when I vagrant up, I still see reference to the repo.  Apparently that is not enough
21:09 magnuse       CrispyBran: do not set the SYNC_REPO environment variable on your host computer
21:05 CrispyBran    Anyone know how to turn off the SYNC_REPO in kohadevbox?
20:58 huginn        04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=19134 normal, P5 - low, ---, koha-bugs, Needs Signoff , C4::SMS does not handle drivers with more than two names well
20:58 * magnuse     tries to make signing off bug 19134 super easy. too easy?
19:46 cait          hi pianohacker :)
19:45 pianohacker   hi cait!
19:06 CrispyBran    Done.  I know you are probably gone, so I will check back with you another time.  :)
19:04 CrispyBran    oleonard: finally done.  Working on .bashrc
18:36 oleonard      I don't know that kohadevbox can switch modes in the middle of the game. You'd have to ask tcohen probably.
18:34 jenkins       Project Koha_Master build #4: FAILURE in 2 min 7 sec: https://jenkins.koha-community.org/job/Koha_Master/4/
18:33 CrispyBran    :( I'm scared to destroy.  It is working.  It's been a while since it was working.
18:32 oleonard      You'll have to navigate back to the directory where your kohadevbox clone is, vagrant destroy, and vagrant up
18:31 CrispyBran    ^Once
18:31 CrispyBran    One I add that line to .bashrc, then what?  vagrant halt and vagrant up?
18:30 jenkins       Project Koha_Master build #3: FAILURE in 49 sec: https://jenkins.koha-community.org/job/Koha_Master/3/
18:28 CrispyBran    70%
18:27 jenkins       Project Koha_Master build #2: FAILURE in 22 sec: https://jenkins.koha-community.org/job/Koha_Master/2/
18:27 jenkins       Project Koha_Master build #1: ABORTED in 2 min 48 sec: https://jenkins.koha-community.org/job/Koha_Master/1/
18:26 oleonard      export SYNC_REPO="H:\\myKohaClone\\kohaclone\\"
18:26 oleonard      Okay, so when you add the line to .bashrc, it'll look like this:
18:26 TGoat         hi oleonard :)
18:26 CrispyBran    No, not at this time.  My hope is to be able to float between work and home at some point.
18:26 TGoat         hey CrispyBran you creating a devbox on your personal system?
18:25 CrispyBran    My documents folder is on a network drive
18:25 CrispyBran    H:\myKohaClone
18:24 oleonard      What is the full Windows-style path to myKohaClone? Something like C:\Users\CrispyBran\Documents\myKohaClone?
18:23 CrispyBran    so, when I update koha, I need to go into this clone and do a git pull?
18:22 CrispyBran    Same folder that kohadevbox folder is in.  I called it myKohaClone.  So it is receiving into mykohaclone/kohaclone
18:22 oleonard      Correct. Because this will act as the devbox's Koha instance, and kohadevbox will skip the step of downloading its own clone.
18:21 CrispyBran    So, help me understand the logistics of this.  We are creating another instance of Koha in a directory outside of kohadevbox?
18:20 oleonard      CrispyBran: What directory did you choose for your Koha clone?
18:20 oleonard      I'll be around for another 40 minutes or so.
18:19 CrispyBran    Okay.  It will be a while.  Receiving is slow.  56% now.
18:19 oleonard      "vi .bashrc" is the command to open the file ".bashrc" for editing in the vi editor.
18:19 oleonard      "cd ~" is the command to switch you to your home directory
18:18 oleonard      My instruction above puts you where you need to be.
18:18 CrispyBran    In the root where the kohadevbox folder lives?
18:17 CrispyBran    Where exactly should this file be?
18:16 CrispyBran    Okay.  50% on receiving objects.
18:16 oleonard      Then: vi .bashrc
18:15 oleonard      From git bash: cd ~
18:15 CrispyBran    What is that file?
18:14 oleonard      You next step will be to create or add to your ~/.bashrc file
18:12 CrispyBran    It is downloading
18:11 oleonard      I'm copying from this https://wiki.koha-community.org/wiki/Version_Control_Using_Git#Getting_Koha_using_Git
18:11 oleonard      ("kohaclone" is an arbitrary name which will become the directory containing the clone)
18:11 oleonard      git clone git://git.koha-community.org/koha.git kohaclone
18:11 oleonard      So from the directory you picked, run the git command to clone Koha:
18:10 CrispyBran    okay.  I'm set.
18:06 oleonard      It's an arbitrary decision. Wherever works for you.
18:06 oleonard      I have a directory in ~/Documents where I put all my web projects, so I have ~/Documents/htdocs/koha-git
18:06 oleonard      You should be outside of the kohadevbox, but it doesn't really matter where after that.
18:05 CrispyBran    Or back up a level outside of kohadevbox?
18:05 CrispyBran    Do I create a new directory here?
18:04 CrispyBran    LICENSE  README.md  roles  site.retry  site.yml  tools  Vagrantfile  vars
18:04 CrispyBran    I see this
18:04 CrispyBran    exited out of SSH
18:04 oleonard      yes
18:04 CrispyBran    Okay.  You may have to hold my hand in this.  We are not talking about the kohaclone inside my kohadevbox, right?  This is a different clone?
18:01 oleonard      From within Git for Windows (but not when ssh'ed to vagrant), navigate to the location in your Windows filesystem that you want to put the clone of Koha
18:00 oleonard      So of course you've got Git for Windows installed because you needed it to get kohadevbox.
17:59 CrispyBran    The only thing I do with Git is run git bash as admin.  I haven't done anything else with it in the windows environment.  After starting git bash, everything I do is in the git bash window.  Am I off track in following you?
17:57 oleonard      In Windows, have you run the Git for Windows program and used it to clone a copy of the Koha repo onto the Windows filesystem somewhere?
17:56 CrispyBran    I'm lost on the terminology here.  I have kohadevbox, and I ran git pull to get the most current code.
17:54 oleonard      And you have a local Koha repo checked out?
17:54 CrispyBran    yes
17:54 oleonard      CrispyBran: Have you installed git for windows?
17:54 wahanui       OK, oleonard.
17:54 oleonard      wahanui: CrispyBran is asking the recommended number of questions
17:53 CrispyBran    Correct
17:53 wahanui       oleonard: I forgot crispybran
17:53 oleonard      wahanui: forget CrispyBran
17:53 oleonard      Hush wahanui
17:53 wahanui       hmmm... CrispyBran is asking too many questions.
17:53 oleonard      CrispyBran?
17:49 oleonard      So you're using kohadevbox successfully but you haven't tried the sync_repo part?
17:49 CrispyBran    No, I just don't understand any of it.  Setting it up, using it.  This part is foreign to me.
17:48 oleonard      I'm working on Windows.
17:48 oleonard      CrispyBran: Are you running into any particular problem?
17:36 CrispyBran    Okay.  Thanks for trying.
17:36 JesseM        Sry CrispyBran I thought had them. Think you're going to need tcohen.
17:33 CrispyBran    Thanks
17:32 JesseM        Let me see if I have notes on that. tcohen helped me with this a few weeks ago.
17:32 CrispyBran    I'm not sure I fully understand the info in the instructions page.
17:31 CrispyBran    Do you know how to set the SYNC_REPO in kohadevbox for Windows?  I've not used it before, and would like to figure it out so I don't lose stuff.
17:31 JesseM        Hi CrispyBran
17:30 JesseM        Yep!
17:25 CrispyBran    JesseM: are you here?
17:22 CrispyBran    tcohen - are you in?
16:47 CrispyBran    Yeah, that's fun.
16:46 wahanui       oleonard: what?
16:46 oleonard      wahanui can have moods just like anyone else
16:44 CrispyBran    and how is this helpful?
16:44 wahanui       the only good morning is a dead one
16:44 CrispyBran    good morning
16:42 wahanui       well, it's morning somewhere, yes
16:42 pianohacker   good morning
15:58 cait          back
15:11 reiveune      bye
14:56 huginn        04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=19134 normal, P5 - low, ---, koha-bugs, NEW , C4::SMS does not handle drivers with more than two names well
14:56 magnuse       bug 19134 - when describing and testing the bug is much harder than fixing it...
13:29 cait          :)
13:19 oleonard      Mmmmm.... Breakfast.
13:16 tcohen        having breakfast at a bar after I left Manuel, now at the office :-d
13:16 cait          wb tcohen, where have you been? ;)
13:10 tcohen        back
12:16 josef_moravec hi tcohen
12:15 tcohen        morning
12:13 rsantellan    good morning #koha
11:03 josef_moravec yes, not much to fun to do this, but really needed I think ;)
11:03 cait          it's good to see clean-up like this
11:02 cait          we ran into this in a current project with  CAS
11:02 cait          thx to you
11:02 josef_moravec thanks cait ;)
10:06 * cait        waves
08:52 * magnuse     waves
08:40 cait          hi AmitGupta
08:39 AmitGupta     heya cait
07:35 gaetan_B      hello
07:06 marcelr       bonjour jajm
07:05 jajm          hello #koha
06:48 marcelr       o/
06:48 alex_a        hello marcelr
06:47 marcelr       hi #koha
06:35 alex_a        bonjour
06:32 wahanui       que tal, reiveune
06:32 reiveune      hello
04:05 AmitGupta     hi indradg_
03:45 huginn        AmitGupta: rangi was last seen in #koha 1 day, 7 hours, 31 minutes, and 16 seconds ago: <rangi> morning
03:45 AmitGupta     @seen rangi
03:45 huginn        AmitGupta: mtompset was last seen in #koha 1 minute and 2 seconds ago: <mtompset> Have a great day (24 hour period), #koha wizzyrea AmitGupta aleisha alexbuckley papa
03:45 AmitGupta     @seen mtompset
03:45 AmitGupta     hi all
03:44 papa          evn 36... you too
03:44 mtompset      Have a great day (24 hour period), #koha wizzyrea AmitGupta aleisha alexbuckley papa
02:27 wizzyrea      idk if you have done editing of frameworks in say excel before?
02:26 wizzyrea      and add/subtract as required.
02:26 wizzyrea      is export the fast add
02:26 wizzyrea      edveal what I usually do in that case
02:20 * mtompset    cheers, "opac/opac-basket.pl battle is won. No refactoring. YAY!"
01:30 edveal        Anyone have a marc framework for images? I want to add a collection of images to my catalog.