Time Nick Message
00:06 mtompset oh sucky. git pull's aren't working for me.
00:07 mtompset the stupid problem I've been fighting all afternoon is going to happen.
00:08 mtompset I'm going to blame symantec end point. I hate it. :)
00:11 wizzycray mtompset, have you tried git:// protocol instead of http?
00:11 wizzycray like, what's your clone command
00:11 wizzycray git clone git://blah
00:11 wizzycray or git clone http://blah
00:12 mtj hey wiz, good idea ^ :0)
00:12 mtompset pretty sure it was git://
00:13 wizzycray you might try it the other way? it's probably nothing but you mentioned your firewall
00:13 mtompset Xenial worked. *whew*
00:13 mtompset Just painful long.
00:13 mtompset And now...
00:13 mtompset sorry, mtj, same failure.
00:14 mtompset what command line are you using on your kohadevbox?
00:15 mtj default
00:16 mtompset $ default
00:16 mtompset ?!
00:16 mtompset BTW...
00:16 mtompset $ sudo koha-shell -c "prove t/db_dependent/00-strict.t" kohadev
00:16 mtompset failed on my xenial.
00:16 mtompset SAME error.
00:17 mtj paste error pls
00:17 mtj hmm, ok
00:18 pastebot "mtompset" at 127.0.0.1 pasted "I commented all the tests except for admin and acqui to shorten the run." (17 lines) at http://paste.koha-community.org/305
00:18 mtompset you must have some TAP harness hack implemented.
00:18 wizzycray can you prove -v it might tell you more
00:18 mtompset wizzycray: No need...
00:19 wizzycray well ok then
00:19 mtompset It's the SAME error.
00:19 mtompset acqui runs 1-43.
00:19 mtompset then admn starts running 1-X
00:19 mtompset and the tap parsing barfs because the counts don't line up.
00:21 mtompset mtj...
00:21 mtompset I'd like to ask you to try a test for me.
00:21 mtompset find a file... any file... that 00-strict.t would look at.
00:21 mtj 'you must have some TAP harness hack implemented.'
00:21 mtompset and add "make_this_blow_up()" into the file.
00:21 mtj ^ ..no, it works on a fresh kohadevbox
00:22 mtompset Well, my jessie will be fresh in a couple hours.
00:22 mtompset I'm 1/3 through the clone.
00:22 mtj vagrant destroy ; vagrant provision
00:22 mtj works on that, for me ^
00:23 mtompset Which reminds me...
00:23 mtompset I should submit my patch.
00:23 mtompset I figured out the cause of the Test::DBIx::Class failures.
00:23 mtompset recursive meeting of dependencies is poorly implemented.
00:24 mtompset just instlal DBD::SQLite and the Test::DBIx::Class installs smoothly.
00:24 mtompset Though, the misc2dev copying is in the wrong place now.
00:25 mtompset had to comment that out.
00:25 mtompset I'll need to manually run it later.
00:45 mtj oops, sorry ... i need to swap to some other stuff now mtompset
00:45 mtompset No problem.
00:45 mtj thanks for testing the patch
00:46 mtj ..i guess my only suggestion would be to test on a pristine kohadevbox
00:47 mtj its a really curious bug :)
00:49 mtj the threads doco looks to have a good workaround.. -> http://perldoc.perl.org/threads.html
00:50 mtj my $can_use_threads = eval 'use threads; 1';
00:50 mtj ..a test for threads ^
00:51 mtj if that fails, then dont use threads :)
00:57 * kidclamp waves
01:01 mtj hiya kidclamp
01:02 kidclamp how goes it mtj?
01:02 mtj hum, i realise that fix wont work for your situ mtompset :(
01:03 mtj ..threads seem to run just fine, its the order of the output thats causing TAP problems
01:03 mtj pretty good here kidclamp, thanks :)
01:03 mtj and you?
01:04 kidclamp not too shabby
01:07 mtompset mtj: No, it isn't the order. It's the count.
01:07 mtompset ok x, ok x+1, ok x+2... the okay's need to be sequential and increasing.
01:08 mtompset but acqui and admin are started at 1.
01:08 mtompset I was thinking what if it were all files...
01:09 mtompset the problem is ok 1 ok 1 ok 1 ok 1...
01:09 mtompset still not increasing.
01:11 mtompset now... all_perl_files_ok is the same as strict_ok, warnings_ok, and syntax_ok... you could thread those into subtests and it would work.
01:15 mtj yes, either way worked fine on my systems
01:16 mtj but i think you'll hit the same problem
01:16 mtompset probably.
01:28 mtj i'll add some other thread-ish tests - perhaps they will show why its failing
01:48 Harold Hello, everyone
01:48 Harold Nice to see you here
01:48 Harold is there someone who cpuld help me please?
01:49 Harold i'm facing a problem trying to add users to koha 16.11
01:49 Harold both staff client and OPAC
01:50 Harold first, when I get into Patrons module, intranet-error.log is added with a new entry: [Mon Feb 06 21:39:54.522722 2017] [cgi:error] [pid 2538] [client 192.168.1.123:60543] AH01215: [Mon Feb 6 21:39:54 2017] members-home.pl: No owner passed in or defined! at /usr/share/koha/intranet/cgi-bin/members/members-home.pl line 70.: /usr/share/koha/intranet/cgi-bin/members/members-home.pl, referer:
01:50 Harold http://biblioteca-admin/cgi-bin/koha/mainpage.pl
01:51 wizzycray hi Harold, are you logged in with the database user?
01:51 Harold I've reviewed previows chat logs, and it says that it is because I'm using database user. And yes, I am. So I'm trying to create a new user, and I face these errors
01:52 wizzycray right ok. Do you have a patron category set up?
01:53 Harold Then, when I get into add new patron form, I get all this: [Mon Feb 06 21:52:42.529541 2017] [cgi:error] [pid 2574] [client 192.168.1.123:60627] AH01215: [Mon Feb 6 21:52:42 2017] memberentry.pl: DBD::mysql::st execute failed: Expression #1 of SELECT list is not in GROUP BY clause and contains nonaggregated column 'koha_biblioteca.authorised_values.id' which is not functionally dependent on
01:53 Harold columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by [for Statement ": /usr/share/koha/intranet/cgi-bin/members/memberentry.pl, referer: http://biblioteca-admin/cgi-bin/koha/members/members-home.pl
01:53 Harold [Mon Feb 06 21:52:42.529720 2017] [cgi:error] [pid 2574] [client 192.168.1.123:60627] AH01215: [Mon Feb 6 21:52:42 2017] memberentry.pl: SELECT *: /usr/share/koha/intranet/cgi-bin/members/memberentry.pl, referer: http://biblioteca-admin/cgi-bin/koha/members/members-home.pl
01:53 Harold [Mon Feb 06 21:52:42.529806 2017] [cgi:error] [pid 2574] [client 192.168.1.123:60627] AH01215: [Mon Feb 6 21:52:42 2017] memberentry.pl: FROM authorised_values: /usr/share/koha/intranet/cgi-bin/members/memberentry.pl, referer: http://biblioteca-admin/cgi-bin/koha/members/members-home.pl
01:53 Harold [Mon Feb 06 21:52:42.529890 2017] [cgi:error] [pid 2574] [client 192.168.1.123:60627] AH01215: [Mon Feb 6 21:52:42 2017] memberentry.pl: : /usr/share/koha/intranet/cgi-bin/members/memberentry.pl, referer: http://biblioteca-admin/cgi-bin/koha/members/members-home.pl
01:54 wizzycray Harold: did you install any of the sample data/categories at all?
01:54 Harold ys, I do have categories on it
01:54 Harold Staff is the one I want to add my user to
01:54 wizzycray are you using ubuntu 16, with mysql 5.7?
01:55 Harold yes
01:55 wizzycray that's why
01:55 Harold oops
01:55 Harold how can be it?
01:55 wizzycray https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17258
01:55 huginn 04Bug 17258: major, P5 - low, ---, gmcharlt, NEW , [OMIBUS] MySQL 5.7
01:55 wizzycray ^ see all those bugs.
01:55 wizzycray that's why ;)
01:55 Harold ok... I'll check
01:56 wizzycray there's a work around https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17258#c6
01:56 huginn 04Bug 17258: major, P5 - low, ---, gmcharlt, NEW , [OMIBUS] MySQL 5.7
01:57 Harold looks like Maria DB is the one I must use
01:58 wizzycray you could do that, or you could do the work around which edits the mysql config
01:58 Harold Thank you so much!
01:58 wizzycray you're welcome, good luck!
01:58 Harold really?
01:58 wahanui really is more trouble than she's worth.
01:58 Harold how could I?
01:58 mtompset If you are willing, you could change your config.
01:59 mtompset https://wiki.koha-community.org/w/index.php?title=Koha_on_ubuntu_-_packages#Ubuntu_16.04_and_MySQL_5.7
02:00 mtompset Speaking ubuntu and mysql 5.7 -- bug 17260
02:00 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17260 major, P5 - low, ---, philippe.blouin, Needs Signoff , updatedatabase.pl fails on invalid entries in ENUM and BOOLEAN columns
02:05 Harold OK... changed mysqld.cnf
02:05 Harold restarted server
02:05 Harold no longer that looong message at opening user add form
02:06 Harold but still error 500 at save button in the form
02:06 Harold same error than before on log file:
02:06 Harold [Mon Feb 06 22:04:33.420411 2017] [cgi:error] [pid 2496] [client 192.168.1.123:60675] End of script output before headers: memberentry.pl, referer: http://biblioteca-admin/cgi-bin/koha/members/memberentry.pl?op=add&categorycode=S
02:06 Harold same problem in user self register on OPAC
02:07 Harold and I find no way to debug and find the error source by myself :(
02:12 mtompset Harold, if you don't have data yet, drop the database, create it, and run the web install again.
02:13 mtompset if you do have data, sadly, I am going for the night.
02:13 Harold Yes... will do
02:13 Harold thanks!
02:13 mtompset Have a good day (24 hour period), #koha Harold wizzycray mtj
03:45 bag hello
03:45 wahanui hello, bag
05:50 Harold Updates about my issue on add patron giving error:
05:50 Harold I installed everithing again, but with MariaDB instead of MySQL
05:50 Harold same error...
06:30 * cait waves
06:36 reiveune hello
07:07 LibraryClaire morning #koha
07:09 drojf hi LibraryClaire
07:09 LibraryClaire moin drojf
07:19 alex_a bonjour
07:19 wahanui kia ora, alex_a
07:20 LibraryClaire salut alex_a
07:26 alex_a hello LibraryClaire
07:29 Joubu hello
07:29 LibraryClaire hey joubu
07:30 * cait waves bbiab
08:09 * magnuse waves
08:10 magnuse @wunder enbo
08:10 huginn magnuse: The current temperature in Bodo, Norway is -1.0°C (8:50 AM CET on February 07, 2017). Conditions: Clear. Humidity: 47%. Dew Point: -11.0°C. Windchill: -8.0°C. Pressure: 30.57 in 1035 hPa (Steady).
08:10 magnuse the sun is shining in Lofoten!
08:16 LibraryClaire hei magnuse
08:16 LibraryClaire @wunder konstanz
08:16 huginn LibraryClaire: The current temperature in Mainaustraße, Konstanz, Germany is 5.8°C (9:13 AM CET on February 07, 2017). Conditions: Mostly Cloudy. Humidity: 85%. Dew Point: 3.0°C. Windchill: 6.0°C. Pressure: 30.04 in 1017 hPa (Falling).
08:19 * cait waves
08:20 cait magnuse: on the Lofoten again? :)
08:20 magnuse i'm not there, but i can see it
08:27 fridolin hie there
08:31 LibraryClaire hey fridolin
08:31 wahanui i heard fridolin was busy at the moment, I asked him to backport the bug fix
08:32 fridolin LibraryClaire: hie watsup ?
08:32 fridolin wahanui: go to bed
08:32 wahanui http://cdn4.list25.com/wp-content/uploads/2012/04/penguin.gif
08:33 LibraryClaire lol
08:34 LibraryClaire fridolin: not a lot ;) work work
08:34 fridolin ;)
09:17 eythian hi
09:17 wahanui niihau, eythian
09:17 eythian @wunder ams
09:17 huginn eythian: The current temperature in Schiphol, Badhoevedorp, Netherlands is 2.7°C (10:10 AM CET on February 07, 2017). Conditions: Drizzle. Humidity: 90%. Dew Point: 1.0°C. Windchill: 1.0°C. Pressure: 30.02 in 1017 hPa (Rising).
09:18 eythian fo shizzle it's drizzle
10:34 lds hello Joubu
10:34 Joubu ;)
10:43 magnuse @wunder enbo
10:43 huginn magnuse: The current temperature in Bodo, Norway is -1.0°C (11:20 AM CET on February 07, 2017). Conditions: Clear. Humidity: 44%. Dew Point: -12.0°C. Windchill: -9.0°C. Pressure: 30.60 in 1036 hPa (Steady).
12:25 AndrewIsh hi #koha!
12:25 AndrewIsh i'm looking for some help with devbox
12:26 AndrewIsh i've got it set up on my local machine and it's fine. i'm now trying to get it running on a headless server. i'm running into a problem while trying to bring it up for the first time
12:26 AndrewIsh it gets to "==> jessie: Waiting for machine to boot. This may take a few minutes..."
12:27 AndrewIsh then i get the following: "The guest machine entered an invalid state while waiting for it to boot. Valid states are 'starting, running'. The machine is in the 'poweroff' state. Please verify everything is configured properly and try again."
12:27 AndrewIsh has anyone else seen this?
12:27 AndrewIsh i checked the irc logs and the only reference i could find was someone trying to run it on a 32 bit machine, my server is definintely not 32 bit. so i'm a bit stumped
12:31 Harold good day, #koha
12:34 tcohen morning
12:35 AndrewIsh tcohen: good morning, the very person i was hoping would appear! :)
12:35 AndrewIsh i have a devbox problem ;-0
12:41 oleonard Hi all
12:41 cait hi AndrewIsh and oleonard
12:42 AndrewIsh hi cait
12:43 * magnuse waves again
12:44 * LibraryClaire waves
12:45 tcohen hi AndrewIsh
12:45 * eythian makes waves
12:45 tcohen hey eythian
12:45 wahanui go back to bed, eythian
12:45 AndrewIsh hi tcohen
12:45 tcohen whats up
12:46 AndrewIsh tcohen: to save me creating more noise in the channel, have a look here: http://irc.koha-community.org/koha/2017-02-07#i_1904237
12:46 * ashimema seeks out ☕
12:46 AndrewIsh it's a really weird one, i'm sure there's a simple explanation though
12:47 eythian AndrewIsh: is your vm set to be 64 bit?
12:47 eythian not just your actual hardware
12:47 AndrewIsh eythian: oooh, good question, i've not checked that. is that in the devbox config?
12:47 eythian I dunno
12:47 eythian I'm just making noises :)
12:47 AndrewIsh noises are good, you never know, they could be the correct noises ;-)
12:47 tcohen AndrewIsh: the devbox uses the debian/jessie64 image, which is 64 bits
12:48 AndrewIsh ok
12:48 tcohen you need to check if your machine supports 64 bit guests
12:48 tcohen i.e. if virtualbox supports 64 bit guests
12:48 eythian yes, but if your vm config is trying to virtualise a 32 bit machine, it still will fail
12:48 tcohen hi nengard
12:49 nengard howdy :)
12:49 AndrewIsh tcohen: are there any logs i could look at? i've not been able to find any
12:50 tcohen "Start VirtualBox, select the virtual machine where you want to run your 64-Bit OS and go into the settings of this VM. Look for "Settings -> System -> Acceleration" and make sure that "Enable VT-x/AMD-V" is activated."
12:50 tcohen that's a way to check
12:51 AndrewIsh it's a headless server, i don't have a ui in which to do that :(
12:52 AndrewIsh i'm sure there must be a way of doing that headless, i'll check
12:53 eythian you can do everything headless in vbox. It's not fun, but is possible.
12:54 eythian you can also probably have it present a vpn or similar endpoint which you could connect to to see what's going on
12:54 tcohen VBoxManage is the command
12:55 AndrewIsh tcohen: indeed, it *appears* to start, but doesn't:
12:55 AndrewIsh andrew@aidev:~/kohadevbox (master *)$ VBoxManage startvm kohadevbox_jessie_1486469724673_38409 --type headless
12:55 AndrewIsh Waiting for VM "kohadevbox_jessie_1486469724673_38409" to power on...
12:55 AndrewIsh VM "kohadevbox_jessie_1486469724673_38409" has been successfully started.
12:55 AndrewIsh andrew@aidev:~/kohadevbox (master *)$ VBoxManage controlvm kohadevbox_jessie_1486469724673_38409 poweroff
12:55 AndrewIsh VBoxManage: error: Invalid machine state: PoweredOff (must be Running, Paused or Stuck)
12:55 AndrewIsh strange...
12:56 tcohen all indicates that you are trying to boot the 64 bit image on an unsupported platform
12:56 tcohen what is the processor you have?
12:56 eythian use vrdp
12:56 AndrewIsh it's a qemu vm
12:57 eythian what
12:57 eythian you're trying to run vbox inside qemu?
12:57 tcohen a dream inside a dream
12:57 eythian you're putting a bag of holding into a bag of holding, man
12:57 AndrewIsh it's all very inception, i know, but i thought it might work...
12:58 eythian I wouldn't be surprised if it doesn't
12:58 eythian however, vrdp will give you a screen
12:58 tcohen qemu probably doesn't provide what Vbox needs to run
12:58 AndrewIsh mmmm, that would certainly appear to be the case
12:59 tcohen cat /proc/cpuinfo | grep -e lm -e vmx -e svm
12:59 eythian I just don't think you can nest virtualisation like that
12:59 eythian use lxc or something instead
12:59 AndrewIsh flags : fpu de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pse36 clflush mmx fxsr sse sse2 syscall nx lm rep_good nopl pni cx16 popcnt hypervisor lahf_lm
12:59 * ashimema would suggest you try using the ansible playbooks from the vm to install directly instead of using virtualbox and vagrnt?
12:59 eythian or see what's going on using vrdp
13:00 tcohen I agree with ashimema
13:00 tcohen the playbook is designed to be ran without vagrant
13:00 AndrewIsh eythian: i'll see if vrdp can shed any light, one tic
13:00 tcohen AndrewIsh: you don't have vmx or svm, so it won't work with the 64 bit image
13:01 tcohen you can try changing debian/jessie64 for debian/jessie32 in the Vagrant file
13:01 tcohen but ashimema is right about using the playbook directly
13:01 * ashimema would like to point out he doesn't know how to do this.. but would like to lear ;)
13:01 AndrewIsh i'm happy to give ashimema's suggestion a go, not sure what it entails though
13:01 tcohen ashimema: you need to create an inventory file
13:01 tcohen like
13:01 AndrewIsh my ansible/vagrant knowledge isn't good
13:02 tcohen echo "IP_OF_QEMU_MACHINE"
13:02 tcohen > inventory.qemu
13:02 tcohen and then
13:02 tcohen run ansible-playbook -i inventory.qemu site.yml
13:03 tcohen there might be some caveats
13:03 tcohen because some functionalities from the playbook are controlled by env variables
13:03 tcohen so instead of ENV you need to set them in vars/user.yml
13:03 tcohen he
13:04 ashimema interesting
13:04 wahanui interesting is sometimes good and sometimes bad
13:04 * ashimema wishes he had mroe time to play with ansible
13:04 AndrewIsh i just tried it, i'll paste the output
13:05 pastebot "AndrewIsh" at 127.0.0.1 pasted "andrew@aidev:~/kohadevbox (mas" (10 lines) at http://paste.koha-community.org/306
13:05 AndrewIsh it's clear what the problem is, but i'm not sure what's trying to ssh and where to get it's public key from
13:06 * AndrewIsh realised he just pasted the ip address of his dev server, ignore that everyone...
13:06 ashimema you should run the playbook from your local machine I believe..
13:06 AndrewIsh ashimema: oh really?
13:06 wahanui i heard really was more trouble than she's worth.
13:06 marcelr hi #koha
13:06 ashimema ansible will then connect to the remote using the IP you gave in your inventory.qemu?
13:07 ashimema I'm assuming your qemu isn't actually a local qemu.. it's te remote vm from BigV ;)?
13:07 AndrewIsh yes, it must be
13:07 ashimema so yeah..
13:07 AndrewIsh ah, ok, i'll try that
13:08 ashimema the playbook is simply a set of commands to run in sequence on a box somewhere via ssh at it's most basic (as far as I understand)
13:08 ashimema so.. in the kohadevbox sense.. we're running up a vagrant based virtual machine then ansible connects to it and installs everything we need for us
13:09 ashimema in your case.. you don't need the vagrant virtualbox server as you already have a remote debian server (that happens to be in a remote qemu)
13:10 * AndrewIsh tries to parse what ashimema just wrote...
13:10 ashimema feel free to slack call me ;)
13:10 AndrewIsh ta
13:31 * kidclamp waves
13:34 * LibraryClaire waves at kidclamp
13:34 kidclamp hi LibraryClaire
13:34 tcohen hi kidclamp LibraryClaire
13:34 LibraryClaire hey tcohen
13:34 kidclamp morning tcohen
13:36 tcohen if anyone has some time, I would like someone to test bug 13757
13:36 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=13757 enhancement, P5 - low, ---, tomascohen, Signed Off , Make patron attributes editable in the opac if set to 'editable in OPAC'
13:36 tcohen it is a big refactoring work
13:36 tcohen on a simple feature
13:36 tcohen it is easy to test
13:36 tcohen i think I covered all edge cases
14:09 magnuse @wunder enbo
14:09 huginn magnuse: The current temperature in Bodo, Norway is -1.0°C (2:50 PM CET on February 07, 2017). Conditions: Clear. Humidity: 40%. Dew Point: -13.0°C. Windchill: -8.0°C. Pressure: 30.66 in 1038 hPa (Rising).
14:18 ebegin Hi everybody !
14:19 ebegin Just showing the IRC channel during a training session ! :)
14:19 kellym Hi !
14:19 ebegin Cheers !
14:42 ashimema hello
14:42 wahanui bonjour, ashimema
14:57 pastebot "marcelr" at 127.0.0.1 pasted "kohadevbox" (5 lines) at http://paste.koha-community.org/307
14:58 marcelr tcohen, Joubu: http://paste.koha-community.org/307
15:03 Joubu hum?
15:03 Joubu ha
15:03 marcelr chmod 755 on the script ?
15:04 Joubu marcelr: but does it try to execute cp_debian_files.pl before cloning misc4dev?
15:05 marcelr no but i tried chmod between two runs
15:05 marcelr and got stuck
15:07 Joubu marcelr: shell: perl misc4dev/cp_debian_files.pl
15:07 Joubu you should not need x
15:08 marcelr yeah but this is something from ansible
15:08 marcelr in the kohadevbox stuff
15:08 marcelr i wanted to try kohadevbox, but my enthusiasm is diminishing when running provision run #381
15:08 marcelr :)
15:11 Joubu I'd suggest to replace misc4dev/cp_debian_files.pl with the full path
15:11 Joubu {{ vagrant_home_dir }}/misc4dev/cp_debian_files.pl
15:12 Joubu tcohen: do you confirm? ^
15:17 tcohen hi
15:17 wahanui hello, tcohen
15:17 tcohen en la carpeta kohadevbox
15:17 tcohen Joubu: yes
15:17 tcohen that makes sense
15:17 cait tuesday--
15:18 * tcohen goes destroy his box and tries
15:19 tcohen Joubu, marcelr: are you sending a pull request?
15:19 marcelr no sir
15:19 tcohen lazy
15:20 marcelr as always
15:20 marcelr but i have a rambling? kohadevbox
15:20 Joubu nope, I can but later
15:21 tcohen marcelr give me a minute
15:21 tcohen and git pull
15:21 wahanui git pull is really simple.
15:21 tcohen he
15:22 marcelr git pull time
15:22 tcohen one more minute ;:-_P
15:45 reiveune bye
15:55 tcohen mtompset++ # taking the time debug the annoying Test::DBIx::Class build failure
15:57 magnuse mtompset++
15:57 * magnuse wanders off to make pancakes
16:01 * LibraryClaire invites herself over to magnuse's for dinner again
16:09 LibraryClaire laters #koga
16:09 LibraryClaire hm
16:09 LibraryClaire also koha...
16:23 huginn New commit(s) kohagit: Bug 18033: Remove duplicate code in paycollect.pl <http://git.koha-community.org/gitweb/?p=koha.git;a=commitdiff;h=0b2393cd655eb43e2d9893b40fb48abf1e786618>
16:58 CrispyBran https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=18075
16:58 huginn 04Bug 18075: critical, P5 - low, ---, koha-bugs, NEW , Hold modal buttons do not work at destination after transfer
17:23 huginn New commit(s) kohagit: Bug 17255 - Upgrade Elastic Search code to work with version 5.1 <http://git.koha-community.org/gitweb/?p=koha.git;a=commitdiff;h=4f178fad53fb748bd1ccf67680e02411918c9584> / Bug 17255 - Upgrade Elastic Search code to work with version 2.4+ - rebased wip <http://git.koha-community.org/gitweb/?p=koha.git;a=commitdiff;h=d1077b5ae6aa5c375ef91e6150a7d39b60513325>
17:53 huginn New commit(s) kohagit: Bug 17929 - You can't edit indicators in the cataloging screen <http://git.koha-community.org/gitweb/?p=koha.git;a=commitdiff;h=18529d7cc5a6334e45d977da9ddfe5429f402c2b> / Bug 17922: Use correct number of digits when replacing date placeholders <http://git.koha-community.org/gitweb/?p=koha.git;a=commitdiff;h=95e94766af653de4bc721af64981140cacecf567> / Bug 18015 - On shelf holds allowed > "If all unavailable" ignores notforl
18:03 huginn New commit(s) kohagit: Bug 17927: (QA followup) Fix timestamp nullable in hold.json <http://git.koha-community.org/gitweb/?p=koha.git;a=commitdiff;h=2f64fd3918a205ac21630657160f61200c791320> / Bug 17927: (QA followup) Fix boolean types <http://git.koha-community.org/gitweb/?p=koha.git;a=commitdiff;h=105b82b8461786ac6695e90aa8a2c1d4c36b4190> / Bug 17927: (followup) Fix /cities cityid type <http://git.koha-community.org/gitweb/?p=koha.git;a=commitd
18:07 jenkins Project Koha_Master_D8 build #105: STILL UNSTABLE in 1 hr 39 min: https://jenkins.koha-community.org/job/Koha_Master_D8/105/
18:07 jenkins kyle: Bug 18033: Remove duplicate code in paycollect.pl
18:07 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=18033 enhancement, P5 - low, ---, josef.moravec, Pushed to Master , If/else sometimes does not make sense after koha account system refactoring
19:29 tcohen so, budgets tables are called aqbudgetperiods
19:29 tcohen and funds, aqbudgets
19:30 oleonard tcohen: Yeah we didn't have the terminology pinned down when the db structure was added :|
19:30 tcohen =D
19:37 cait yeah
19:37 cait basically it was switched later for the interface
19:37 cait but not in the code
19:38 tcohen yeah, and we started with budgets, and then generalized
19:38 tcohen budgets > funds but kept the names
19:38 rangi i stil think those are backwards
19:39 tcohen ?
19:39 rangi you should have a fund
19:39 rangi and you define budgets for it
19:39 rangi not the other way round
19:39 rangi but that would be a massive change
19:39 * tcohen won't discuss terminology as it is not his best
19:39 rangi one day, when i win lotto and retire, i will build a whole new acquisitions system
19:40 tcohen hehe
19:40 * oleonard buys rangi a lottery ticket
19:40 * tcohen too
19:40 * ibeardslee buys one with plans to donate some winnings to rangi
19:41 oleonard "some" :)
19:41 * aleisha has no money but offers support
19:41 ibeardslee students eh?
19:41 aleisha you know how it is
19:41 tcohen rangi, according to google budget is well defined
19:42 tcohen 'an estimate of income and expediture set for a period of time'
19:42 rangi yeah
19:42 tcohen i think it is fund that doesn't fit
19:42 rangi so you have a fund
19:42 rangi Fiction books
19:42 rangi say
19:42 rangi and you define a budget for 2017
19:42 rangi for it
19:42 rangi thats how most accounting systems work
19:43 tcohen hm
19:43 rangi then yuo can see how much you have spent over the years etc
19:43 rangi and you can roll over
19:43 tcohen we might need a third category
19:43 aleisha that makes way more sense
19:43 aleisha our acq module is all backwards
19:43 jenkins Project Koha_Master_D8 build #106: STILL UNSTABLE in 1 hr 35 min: https://jenkins.koha-community.org/job/Koha_Master_D8/106/
19:43 jenkins * kyle: Bug 17255 - Upgrade Elastic Search code to work with version 2.4+ -
19:43 jenkins * kyle: Bug 17255 - Upgrade Elastic Search code to work with version 5.1
19:43 jenkins * kyle: Bug 15030 - Certain values in serials' items are lost on next edit
19:43 jenkins * kyle: Bug 15030 - Fixes the serials fields associated with a plugin, to not
19:43 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17255 enhancement, P5 - low, ---, olli-antti.kivilahti, Pushed to Master , Upgrade Elastic Search code to work with version 5.1
19:43 jenkins * kyle: Bug 15030 - continue. The enumchron value was overwritten by 'header'
19:43 jenkins * kyle: Bug 15030: Add tests
19:43 jenkins * kyle: Bug 17775 - Add new user with LDAP not works under Plack
19:43 jenkins * kyle: Bug 18044: Label Batches not displaying
19:43 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=15030 blocker, P5 - low, ---, philippe.blouin, Pushed to Master , Certain values in serials' items are lost on next edit
19:43 jenkins * kyle: Bug 18044: Add a test
19:43 jenkins * kyle: Bug 18013 - acqui/transferorder.pl typo in find method
19:43 jenkins * kyle: Bug 18005: Re-styled pagination on search results with Bootstrap
19:43 jenkins * kyle: Bug 17871: Remove zebra::snippet to allow access to facets in YAZ 5.8.1+
19:43 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17775 blocker, P5 - low, ---, liz, Pushed to Master , Add new user with LDAP not works under Plack
19:43 jenkins * kyle: Bug 17871: (followup) Remove zebra::* from the packages templates
19:43 jenkins * kyle: Bug 18015 - On shelf holds allowed > "If all unavailable" ignores
19:43 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=18044 critical, P2, ---, cnighswonger, Pushed to Master , Label Batches not displaying
19:43 jenkins * kyle: Bug 17922: Use correct number of digits when replacing date placeholders
19:43 jenkins * kyle: Bug 17929 - You can't edit indicators in the cataloging screen
19:43 jenkins * kyle: Bug 16387: Fix default shortened loan period time
19:43 jenkins * kyle: Bug 17782 - Patron updated_on field should be set to current timestamp
19:43 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=18013 critical, P5 - low, ---, dpavlin, Pushed to Master , acqui/transferorder.pl typo in find method
19:43 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=18005 major, P5 - low, ---, josef.moravec, Pushed to Master , Pagination of the search result displayed wrong
19:43 jenkins * kyle: Bug 17782 - (QA Followup)
19:43 jenkins * kyle: Bug 17782: Fix tests
19:43 jenkins * kyle: Bug 17927: Fix /holds and /patrons data types
19:43 jenkins * kyle: Bug 17927: (followup) Fix /cities cityid type
19:43 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17871 major, P5 - low, ---, dcook, Pushed to Master , Can't retrieve facets (or zebra::snippet) from Zebra with YAZ 5.8.1
19:43 jenkins * kyle: Bug 17927: (QA followup) Fix boolean types
19:43 jenkins * kyle: Bug 17927: (QA followup) Fix timestamp nullable in hold.json
19:43 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=18015 major, P5 - low, ---, mirko, Pushed to Master , On shelf holds allowed > "If all unavailable" ignores notforloan
19:43 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17922 major, P5 - low, ---, julian.maurice, Pushed to Master , Default value substitution for month and day should be fixed length
19:43 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17929 major, P5 - low, ---, josef.moravec, Pushed to Master , You can't edit indicators in the cataloging screen
19:43 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=16387 major, P5 - low, ---, lari.taskula, Pushed to Master , Incorrect loan period calculation when using decreaseLoanHighHolds feature
19:43 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17782 major, P5 - low, ---, nick, Pushed to Master , Patron updated_on field should be set to current timestamp when borrower is deleted
19:43 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17927 normal, P5 - low, ---, tomascohen, Pushed to Master , REST API: /holds and /patrons attributes have wrong types
19:44 rangi jeez bots, get a room
19:44 tcohen rangi: jenkins is doing its best
19:44 aleisha im glad bug 18044 went through
19:44 aleisha that was messing me up yesterday
19:45 * tcohen is happy 17255 is in, and we can now move to making it even better
19:46 tcohen can anyone take a look at 17932? :-D
19:46 rangi yep, and the stuff i was doing for search overdrive and stuff can get submitted soon
19:47 tcohen take a look == sign it
19:47 rangi (it pulls in a libraries overdrive collection into their elasticsearch index, so can search over both easily)
19:47 tcohen rangi: awesome!
19:47 wahanui That'll be $1 for the awesome jar, tcohen
19:47 tcohen oops
19:47 tcohen need to pick Manuel soon!
19:47 tcohen bye!
20:06 * cait waves to alexbuckley_
20:07 alexbuckley_ Hi cait
20:07 oleonard rangi: that overdrive feature sounds really useful
20:07 cait we need to do more ES testing, it gets cooler the minute :)
20:09 rangi yeah, working on recordedbooks too, combine them with the patches that are already there that allow users to circulate from koha
20:09 rangi then your users can search and borrow stuff from overdrive without leaving koha
20:10 rangi should be super handy
20:14 oleonard Bye all
20:17 eythian rangi: Dave from HZ is visiting me later in the month
20:18 eythian rangi: surely you need to consult with marcelr some time :)
20:21 rangi :) ill float that idea past him
20:26 eythian I have a couch bed should catalyst want to do it cheaper...
20:30 rangi :)
21:29 cait ah no tcohen
21:52 cait hm it looks like i can't place holds in my 16.11.x branch
21:52 cait plack error log shows: Template process failed: undef error - WHILE loop terminated (> 1000 iterations)
21:52 cait when I search for a patron to place a hold on, then internal server error...
21:53 wizzycray I feel like I have seen this
21:54 wizzycray oh wait I have
21:54 cait i have gone backon my branch, couldn't find a 'good' spot
21:54 wizzycray it is something to do with....
21:54 wizzycray oh damn I looked at this just last week
21:54 cait so I am thinking it might be a config difference somehow
21:55 wizzycray this is staff client right
21:55 cait yep
21:56 tcohen hi
21:57 cait hi tcohen
21:57 cait have you seen this by chance:
21:57 cait (22:52:22) cait: plack error log shows: Template process failed: undef error - WHILE loop terminated (> 1000 iterations)
21:57 cait (22:52:22) cait: when I search for a patron to place a hold on, then internal server error...
21:57 cait in staff
21:58 cait also - bug 17927 - backport?
21:58 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17927 normal, P5 - low, ---, tomascohen, Pushed to Master , REST API: /holds and /patrons attributes have wrong types
21:58 cait i have been able to test patrons - but not holds
21:58 wizzycray yeah cait I"m getting that too
21:58 cait not getting the path right maybe
21:58 cait wizzyrea: on master?
21:58 cait ugh
21:58 wizzycray in 16.11.03
21:59 cait but not in master?
21:59 cait i went back about 100 commits
21:59 cait still seeing it
21:59 wizzycray idk I need to check that
21:59 cait so i think not something i pushed recently hm
22:00 wizzycray Template process failed: undef error - WHILE loop terminated (> 1000 iterations)
22:00 tcohen cait: template cache?
22:00 cait not set
22:00 cait or what do you mean?
22:00 wizzycray yes, explain :P
22:00 wizzycray please
22:00 tcohen you went back and the problem remains
22:01 wizzycray I am surprised that no one is screaming about this bug, actually
22:02 tcohen so, on the patron search when placing a hold?
22:02 cait tcohen: i tihnk i did yes - about 100 commits back, i wanted to try a git bisect, but couldn't find a good commit
22:02 cait yeah, look for a record with an item
22:02 cait go tot he holds tab
22:02 cait search for a patron - auto-suggest works ok
22:02 cait when you send the search or click one of the suggested - internal server error
22:03 cait and the error i posted earlier about the loop
22:03 tcohen cannot reproduce
22:03 wahanui cannot reproduce is https://xkcd.com/583/
22:03 cait i wonder what it could be
22:04 wizzycray I see the same thing
22:04 cait no clue where to start searching even
22:04 cait there is nothing in the intranet error logs
22:04 wizzycray the config for this one where I see it is 16.11 native
22:04 tcohen https://snag.gy/fBvdnI.jpg
22:05 tcohen i'm on master
22:06 tcohen cait, the REST api is WIP in general
22:06 tcohen on 16.11 it has the wrong data types
22:06 cait actually, i had that happen
22:06 cait can you try adding a circ rule that will allow you to place on hold?
22:06 tcohen it is your call, but I'd backport the type fixes
22:07 cait ugh
22:07 cait wizzyrea: try changing holds per record count
22:07 cait i set it to 0 and the error went away
22:07 wizzycray !
22:07 cait tcohen: could you try setting the setting to something like 99?
22:08 cait to see if it breaks then?
22:08 wizzycray oh, this lib has 999 holds allowed
22:08 wizzycray per record.
22:08 wizzycray which is not 1000 iterations but close to.
22:09 tcohen still works
22:09 tcohen with 99
22:09 cait 999
22:09 wizzycray I changed mine from 999 to 10 and now it is working
22:09 cait kills it for me
22:09 wizzycray 999 kills it for me too
22:09 cait cool
22:09 cait so we got that 'solved'
22:09 cait i will file a bug
22:09 cait thx all for helping :)
22:10 wizzycray w. t. f. ;)
22:10 cait so it's not something i pushed at least heh
22:10 tcohen https://snag.gy/1TMVy5.jpg
22:10 tcohen 999 killed it
22:10 cait it fits today
22:10 cait today was a day of odd things
22:11 tcohen question is why the template has such a big loop
22:11 tcohen long
22:12 cait yeah, certainly something strange there
22:12 cait but at least we have a step by step to break things onw
22:12 cait tcohen: can you give me an example of how to test the holds rest api?
22:12 cait i am not getting it right i think
22:12 cait this looks http://localhost:8081/api/v1/patrons/31 good
22:13 wizzycray if I had to guess
22:13 wizzycray it's the multiple holds per title part
22:13 cait http://localhost:8081/api/v1/patrons too, but /holds seems not to work
22:15 tcohen cait: does it work without the patch?
22:16 cait so it should work?
22:16 cait will try in a sec, just finishing the bug
22:16 tcohen maybe you shouldn't backport it
22:16 tcohen because it fixes the types
22:17 tcohen which doesn't mean it will work
22:17 tcohen because we have a situation with integers and booleans
22:17 cait bug 18076
22:17 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=18076 normal, P5 - low, ---, koha-bugs, NEW , Plack error when placing a hold and holds per record is set to 999
22:17 tcohen that requires TO_JSON
22:17 tcohen bug 17932
22:17 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17932 enhancement, P5 - low, ---, tomascohen, Signed Off , Koha::Object should provide a TO_JSON method
22:18 cait yeha
22:18 cait it works without hte patches
22:18 cait hm
22:18 cait wonder if the error before affected it
22:18 cait sec
22:18 tcohen cait, it shouldn't work with the patch
22:19 cait nope
22:19 cait it breaks
22:19 tcohen yeap
22:19 cait ok, so not backporting
22:19 tcohen it changes
22:19 tcohen suspend and lowestPriority
22:19 tcohen into booleans
22:19 cait left a note
22:20 tcohen which is not handled without 17932
22:20 * tcohen hopes someone QAes it
22:20 cait hm so broken on master now too?
22:21 tcohen the holds endpoint?
22:21 tcohen yes
22:22 tcohen we need more people to QA
22:22 tcohen the patches are there
22:23 * cait pushes so jenkins can work overnight
22:23 tcohen hehe
22:25 tcohen cait: about 18076
22:25 tcohen i'm not sure plack is guilty
22:25 cait ah
22:25 cait there was no error in the intenral logs - that's why i assumed
22:25 cait but i haven't tried turning it off
22:26 tcohen when plack is enabled (on packages) the logs are on /var/log/koha/kohadev/plack-error.log
22:26 tcohen in kohadevbox theres a shortcut
22:26 tcohen koha-plack-error
22:26 wizzycray tcohen, a slight grizzle I have about that
22:26 tcohen koha-plack-err
22:27 tcohen if you disable plack
22:27 tcohen you will get the same error the logs show
22:27 tcohen but on the browser
22:27 wizzycray it chucks all of the errors in there, instead of for their respective interfaces. Maybe I"m being sentimental for the compartmental logs of ye olden tymes
22:27 tcohen sudo koha-plack —disable kohadev
22:27 tcohen sudo service apache2 restart
22:27 tcohen wizzycray: what's because we lack womanpower
22:28 tcohen to properly use Koha::Logger
22:28 tcohen in plack.psgi
22:28 cait feel fre to correct/amend the bug
22:28 cait getting too late for me tonight - gotta get ready for bed :)
22:29 wizzycray tcohen: touche
22:30 tcohen wizzycray: maybe you can file a bug? :-D
22:30 wizzycray ;)
22:30 tcohen I think ther's a Plack::Middleware::Log4perl thing that we could reuse
22:31 tcohen or steal and adapt to Koha::Logger
22:32 tcohen is academy over?
22:32 tcohen the log stuff could be an easy one
22:35 wizzycray it is over
22:57 bag @wunder pdx
22:57 huginn bag: The current temperature in Portland, Oregon is 3.0°C (2:53 PM PST on February 07, 2017). Conditions: Light Rain. Humidity: 89%. Dew Point: 2.0°C. Windchill: 0.0°C. Pressure: 29.78 in 1008 hPa (Rising). Winter Weather Advisory in effect until 1 PM PST Wednesday...
22:59 wizzycray WOO great on 17775
23:00 cait bug 17775
23:00 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=17775 blocker, P5 - low, ---, liz, Pushed to Stable , Add new user with LDAP not works under Plack
23:00 cait ah :)
23:00 cait that one i couldn't test, but change looked safe and wizzyrea tested :)
23:01 wizzycray I have an excellent setup for LDAP testing now
23:01 cait :)
23:01 wizzycray with a real LDAP server and everything!
23:01 * cait is envious
23:01 cait :)
23:01 cait but now... sleep
23:01 cait good night #koha
23:01 wizzycray zzz's for you
23:17 tcohen wizzycray: don't forget to file that bug :-P
23:42 tcohen good night #koha
23:57 eythian @later tell LibraryClaire https://youtu.be/wuCy_UkKBcs
23:57 huginn eythian: The operation succeeded.