Time Nick Message 23:59 alex_ Line 15 says "# The url from where the 'config.vm.box' box will be fetched if it" but line 13 says "config.vm.box = "base"" 23:56 wizzyrea your* 23:56 wizzyrea How frustrating. In you vagrantfile, what does your line 15 say 23:54 alex_ Yes 23:54 wizzyrea are you inside your kohadevbox directory? 23:52 alex_ It is from https://github.com/wizzyrea/kohadevbox 23:51 wizzyrea mine shouldn't have that problem 23:50 wizzyrea alex_: was that from my github or the digibib one? 23:10 alex_ * The box 'base' could not be found. 23:10 alex_ vm: 23:10 alex_ the following errors and try again: 23:10 alex_ There are errors in the configuration of this machine. Please fix 23:10 alex_ Bringing machine 'default' up with 'virtualbox' provider... 23:10 pianohacker alex_++ 23:10 pastebot "alex_" at 127.0.0.1 pasted "Bringing machine 'default' up" (6 lines) at http://paste.koha-community.org/304 23:10 alex_ Yes it is but I forgot to mention after I install vagrant cachier and then vagrant up I get another error saying.. 23:05 wizzyrea about vagrant cachier 23:05 wizzyrea I am pretty sure it's in the instructions. 22:52 pianohacker alex_: if you're gonna put a lot of text into channel, please use paste.koha-community.org :) 22:51 wizzyrea you probably need to install the vagrant cachier plugin for virtualbox 22:51 wizzyrea hi alex_ I didn't see you arrive - I saw your messages :) 22:51 alex_ Alex 22:51 alex_ What would you suggest I do now? 22:51 alex_ And then installing your kohadevbox version from https://github.com/wizzyrea/kohadevbox, and following the normal configuration steps I still got the same error. 22:51 alex_ rm -rf kohadevbox (to remove the old faulty kohadevbox) 22:51 alex_ I talked about this problem with Francesca the other day and she suggested I installed your version of kohadevbox which didn't have a error (bug) as the Koha Wiki suggested version does. After writing in 22:51 alex_ * The following settings shouldn't exist: run†22:51 alex_ shell provisioner: 22:51 alex_ * The box 'bento/debian-7.8' could not be found. 22:51 alex_ * The following settings shouldn't exist: post_up_message 22:51 alex_ vm: 22:50 alex_ the following errors and try again: 22:50 alex_ There are errors in the configuration of this machine. Please fix 22:50 alex_ Bringing machine 'default' up with 'virtualbox' provider... 22:50 alex_ Run 'vagrant plugin install vagrant-cachier' to speed up provisioning. 22:50 alex_ vagrant-cachier 22:50 alex_ and reinstalled: 22:50 alex_ The plugins below will not be loaded until they're uninstalled 22:50 alex_ either uninstalled or uninstalled then reinstalled. 22:50 alex_ This message will not go away until all the plugins below are 22:50 alex_ prior to reinstalling. 22:50 alex_ it is _highly recommended_ to do a `vagrant plugin uninstall` 22:50 alex_ To ensure that all the dependencies are properly updated as well 22:50 alex_ the plugins must be uninstalled and reinstalled. 22:50 alex_ these component versions were changed (which rarely happens), 22:50 alex_ that had different versions of underlying components. Because 22:50 alex_ “The following plugins were installed with a version of Vagrant 22:50 alex_ ter I try to run “vagrant up†22:50 alex_ Hi wizzyrea. I got Koha working for a while but when I tried to apply a patch I went to the localhost and could not see the applied patch. Therefore I thought I would reload the kohadevbox and vagrant from the external harddrive I had backed up a instance of ubuntu on. But for the first time ever I had a external hard drive fail. So I had to go back through all the steps you helped me with to load koha again. But I keep getting this error af 21:50 wahanui privet, wizzyrea 21:50 wizzyrea hi 21:49 eythian Hi 21:45 Nemo_bis But tomorrow :) 21:45 Nemo_bis I'll probably need this https://wiki.koha-community.org/wiki/Fix_zebra_permissions 21:41 gmcharlt drojf++ 21:21 drojf good night #koha 21:09 drojf not sure why i did this, but here is an ascii graph of koha releases 3.04 and later. http://abunchofthings.net/koha/pics/koha_releases.png 20:47 thatcher edveal hi 20:45 edveal Hi thatcher! 20:44 NateC good good! 20:44 thatcher how goes it NateC, pianohacker 20:44 NateC Hey Thatcher! 20:44 pianohacker hi thatcher ! 20:44 thatcher hbd bag 20:43 bag happy birthday thatcher 20:43 thatcher o/ 20:43 nengard :) 20:43 nengard Hi thatcher 20:43 nengard WOA!!!! 20:43 thatcher how goes it 20:42 trea hi 20:41 Nemo_bis no longer happy... 20:41:03-11/02 [server] Adding dynamic listener on /var/run/zebrasrv.pid id=0 PID=19274 20:36 pianohacker that way you can see if the searches are coming through and if so what they do 20:36 pianohacker Nemo_bis: you could try running zebrasrv yourself with -D, -T and -l ... omitted and -v debug added 20:34 Nemo_bis hmm is the pid right 20:32 Nemo_bis Not really http://paste.koha-community.org/303 20:31 pianohacker Nemo_bis: okay, cool, just wanted to check. Is there anything else in the log? 20:30 Nemo_bis 18016 ? Ss 0:00 /usr/bin/zebrasrv-2.0 -D -T -p /var/run/zebrasrv.pid -f /etc/koha/koha-conf.xml -l /var/log/koha/zebrasrv.log 20:30 Nemo_bis 18:43:36-11/02 [server] Adding threaded listener on unix:/var/run/koha/zebradb/bibliosocket id=1 PID=18015 20:30 Nemo_bis Sure that's the first thing I did 20:30 pianohacker and ps ax | grep zebra 20:30 pianohacker Nemo_bis: check ze logs! 20:29 wizzyrea i.e. you didn't unmap biblionumber or something did you 20:29 wizzyrea if you do a framework test, is it all ok? 20:29 Nemo_bis pianohacker: only the search bar at cataloguing/addbooks.pl finds records (from the staged area) 20:28 Nemo_bis pianohacker: the catalogue search never returns any result 20:28 wizzyrea <3 20:28 wizzyrea ^.^ 20:28 pianohacker nyuk nyuk 20:28 pianohacker den ya betta go catch it! 20:28 wizzyrea you can rebuild all you like, it won't matter if zebra isn't running. 20:28 wizzyrea is your zebra running? 20:27 pianohacker try looking at the error logs for zebra (which may be in journalctl -u zebra.service for you) 20:27 pianohacker Nemo_bis: and you still can't search? Are you positive you're searching the catalog? (catalogue/search.pl?) 20:27 Nemo_bis pianohacker: the rebuild did something, not sure what though :) no visible effect 20:26 wahanui success is a good thing jenkins 20:26 pianohacker Nemo_bis: success? 20:24 Dyrcona Good afternoon. ;) 20:23 Francesca morning 20:21 wizzyrea also good morning. 20:20 wizzyrea it's early. 20:20 wizzyrea there shoudl be a from in there 20:20 wizzyrea i.e. select biblionumber where <conditions> will do one biblionumber per line 20:20 wizzyrea nuentoter: it will if you tell it to 19:47 huginn New commit(s) kohagit: Bug 15760: Fix order by direction for shelves <http://git.koha-community.org/gitweb/?p=koha.git;a=commitdiff;h=71d4942c30f30fdbdf89a93f59e89a4f28e0dd3f> / Bug 15760: Avoid SQL injections <http://git.koha-community.org/gitweb/?p=koha.git;a=commitdiff;h=16e55c1f3283402f766ed844baa5db333ed2f585> / Revert bug 13618 - "Prevent XSS in the Staff Client and the OPAC" due to performance... <http://git.koha-community.org/gitweb/?p=ko 19:46 nuentoter ok thats what i was curious about, i didnt know if it would output the format correctly (one record per line) 19:45 oleonard nuentoter: Report results can be downloaded as a csv or spreadsheet 19:44 oleonard nuentoter: You could create a report to generate the list 19:37 nuentoter When doing a batch record delete, I can upload a file of the records. where/if can koha create this file 19:37 Nemo_bis Seems to be doing something but silly me neglected to add -v 19:36 nuentoter i have a quick question, I tried to google it but I guess I cannot word it correctly to get to the answer I want. 19:35 Nemo_bis ok 19:35 pianohacker bbl 19:35 pianohacker same command as before, but with an -r instead of a -z 19:35 pianohacker Nemo_bis: try running a full rebuild 19:34 pianohacker that's probably the case 19:34 Nemo_bis If I search for a title I find the staged record, but nothing outside the stage area 19:34 Nemo_bis no cron in /etc/cron.d either but i tried running the rebuild multiple times and I'm not sure whether some of the times something got done 19:33 pianohacker and are searches working (assuming zebrasrv is running)? 19:33 pianohacker in cron.d, perhaps? 19:33 pianohacker are you positive there's not a cronjob running? 19:33 Nemo_bis pianohacker: nothing 19:33 pianohacker Nemo_bis: and nothing not done? 19:32 Nemo_bis | 1 | 5702 | 19:32 pastebot "Nemo_bis" at 127.0.0.1 pasted "show table status" (178 lines) at http://paste.koha-community.org/302 19:31 pianohacker Your records are imported, at least 19:31 pianohacker Nemo_bis: select done, count(*) from zebraqueue group by done; 19:31 Nemo_bis zebraqueue has 5681 rows 19:30 Nemo_bis (multiple import attempts plus 1 test record created manually) 19:30 Nemo_bis pianohacker: 4701 19:29 pianohacker Nemo_bis: connect to the Koha database and run SELECT COUNT(*) FROM biblio; 19:29 Nemo_bis pianohacker: enough 19:28 pianohacker Nemo_bis: are you comfortable with mysql? 19:27 Nemo_bis pianohacker: the current status of the batch is "imported" but I'm not sure the import really succeeded 19:26 pianohacker Nemo_bis: have you imported those staged records into the catalog? 19:26 bag . 19:26 Nemo_bis pianohacker: I've staged some MARC records for index but when I go to manage the staged marc records there is no "Clean" button http://translate.koha-community.org/manual/3.22/en/html-desktop/#managestaged 19:13 pastebot "Nemo_bis" at 127.0.0.1 pasted "rebuild_zebra.pl does nothing after staging MARC records" (33 lines) at http://paste.koha-community.org/301 19:04 Nemo_bis No errors but also no noticeable effect, looking for logs 19:03 Nemo_bis Hm there is also a -daemon option 19:02 pianohacker Nemo_bis: and make sure that those cronjobs are run with the correct user and values of $PERL5LIB and $KOHA_CONF 19:02 pianohacker Nemo_bis: you'll want to run the rebuild_zebra script with -z -a -b -x (process queued updates to authorities and biblios using XML-formatted records) 19:01 Nemo_bis My configuration is being tweaked at http://github.com/nemobis/beic-koha 19:00 pianohacker ah, okay. That's at least somewhat sane :) 19:00 Nemo_bis pianohacker: fedora 23 19:00 pianohacker Nemo_bis: which distro? 19:00 Nemo_bis pianohacker: yes 18:58 pianohacker ? 18:58 pianohacker Nemo_bis: I want to confirm: you're installing from tarball, and I'm guessing that means you're not on Debian 18:58 Nemo_bis Ah! bin/migration_tools/rebuild_zebra.pl ? 18:56 Nemo_bis pianohacker: thanks, but I don't think I have such a cronjob: what script should the cronjob run? 18:53 pianohacker Nemo_bis: the first (zebrasrv) is the important one. As long as you have the rebuild-zebra cronjob set up the second isn't required 18:45 Nemo_bis https://wiki.koha-community.org/wiki/Koha_3.10_on_Centos_6.3_x86_64_en#Koha_zebra_index_configuration gives two commands but I don't understand why 18:44 Nemo_bis So if I handle launching zebrasrv myself I'm all set, right? 18:43 pianohacker yup 18:43 Nemo_bis AFAICS, that script launched the "zebrasrv" command 18:42 Nemo_bis pianohacker: thanks; the installer doesn't move that into the install directory though 18:37 pianohacker Nemo_bis: check debian/scripts/koha-start-zebra 18:36 huginn 04Bug 8519: enhancement, P5 - low, ---, tomascohen, CLOSED FIXED, Make koha-index-daemon run on startup 18:36 Nemo_bis It still requires the external library? https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=8519#c14 18:33 Nemo_bis I'm trying to run the zebra indexer with systemd... where is the code that koha-index-daemon-ctl.sh is supposed to eventually run? :/ 18:32 Nemo_bis Hi 18:09 gaetan_B bye 16:41 oleonard Bugzilla giving errors, but then doing what it was told anyway. 16:17 oleonard Ugh... Internal server error when submitting a bug? 16:09 Joubu bye! 15:45 khall oleonard: you can always clear it out and then rebuild it if it is needed for anything 15:44 oleonard Okay... Trying to decide what to do about the old bad data we've got in biblio-level itemtype for a lot of records. 15:43 khall you need to have record level itemtypes so you can request for records that have no items 15:42 khall oleonard: another example that jumps out is for article requests ( which is still in process ) 15:41 oleonard Yes just for hold limits, or are there other issues you're aware of? 15:41 khall oleonard: yes, in some cases 15:40 oleonard khall: is it the case that holds--or at least hold limits--depend on there being a biblio-level itemtype? 15:40 khall ; ) 15:40 cait ;) 15:39 * cait hands khall over to oleonard 15:39 cait but now i can relax until the meeting and then talk about that :) 15:39 khall cait: I think you are correct about that 15:39 cait maybe they should just have a 'name' or 'topic' 15:39 cait i think the numbering scheme is a bit problematic with changes - not sure how to fix that 15:39 khall yep! 15:38 cait so proof reading ok? 15:38 khall about the rule merging 15:37 khall cait: yes, I looked them over and agree with you 15:37 oleonard Oh i've got one for khall after cait 15:35 cait :) 15:35 cait did you see my message about the coding guideline changes? 15:34 khall what's up? 15:34 cait khall: around? 14:24 marcelr thx tcohen 14:24 huginn tcohen: The operation succeeded. 14:24 tcohen @later tell gmcharlt dependencies on unstable packages need attention 14:12 oleonard I'm going to move it to the middle. 14:10 cait in that case i think 3 options is confusing enough :) 14:09 cait oleonard: so having a cancel and a confirm would probably be the same action? 14:09 cait oleonard: confirm does nothing, right? 14:09 nengard hehe 14:09 nengard exactly 14:08 drojf ah ok. that is not the worst thing i could imagine ;) thanks! 14:07 nengard it's such a tiny issue and they know about it and are fixing it 14:07 nengard it's the breadcrumbs showing at the top http://screencast.com/t/pehslVkUG 14:06 nengard let me get you a screenshot 14:06 nengard it's a header thing 14:06 nengard hehe 14:06 nengard nope 14:05 drojf nengard: does it look better in 3.20? 14:05 oleonard I'm working on a big patch for that, but now worrying its too big. 14:04 cait oleonard: should the icons be font awesome? 14:04 nengard drojf it works on 3.22 - but does have some graphic gliches 14:04 cait then it doesn't set to waiting... could also be clearer i guess 14:04 oleonard We do sometimes with holds. Not sure why not always. 14:04 cait ah, probably only when hte hold is not waiting yet 14:04 cait oleonard: hm don't we usually have an ignore... 14:03 oleonard Or should the 'cancel' button be in the middle? Doesn't feel right to have it on the left. 14:03 oleonard Does this dialog need an 'ignore' option so that the "cancel hold" doesn't /seem/ like an ignore button? http://zivotdesign.com/p/#1/14551993372678 14:01 drojf nengard: do you know if the ebsco plugin for koha is bound to certain versions of koha? i think it says 3.16+, is it safe to use with 3.18, 3.20, 3.22? 14:01 * andreashm waves 13:59 cait [off] sec patch passed qa now 13:59 cait tcohen++ 13:57 nengard wow - much nicer in greece 13:56 huginn nengard: The current temperature in North Acres, Austin, Texas is 9.7°C (7:55 AM CST on February 11, 2016). Conditions: Clear. Humidity: 61%. Dew Point: 3.0°C. Windchill: 10.0°C. Pressure: 30.15 in 1021 hPa (Steady). 13:56 nengard @wunder 78754 13:50 drojf woah. can we go now? 13:49 huginn drojf: The current temperature in Thessaloniki, Greece is 15.0°C (3:20 PM EET on February 11, 2016). Conditions: Mostly Cloudy. Humidity: 31%. Dew Point: -2.0°C. Pressure: 29.80 in 1009 hPa (Steady). 13:49 drojf @wunder thessaloniki 13:49 huginn drojf: The current temperature in Berlin Tegel, Germany is 5.0°C (2:20 PM CET on February 11, 2016). Conditions: Mostly Cloudy. Humidity: 81%. Dew Point: 2.0°C. Windchill: 0.0°C. Pressure: 29.53 in 1000 hPa (Steady). 13:49 drojf @wunder berlin, germany 13:46 huginn oleonard: The current temperature in Heatherstone, Athens, Ohio is -11.3°C (8:46 AM EST on February 11, 2016). Conditions: Clear. Humidity: 60%. Dew Point: -18.0°C. Windchill: -11.0°C. Pressure: 30.24 in 1024 hPa (Steady). 13:46 oleonard @wunder 45701 13:46 drojf obvious 13:46 drojf i will, just wanted to make sure i do not miss something obviuos 13:45 cait maybe something to add to a release list 13:45 cait just have to rmember to keep it updated 13:45 cait and i agree too 13:45 cait file a website bug? :) 13:45 drojf :) 13:45 drojf yes, and we should 13:44 oleonard We don't have a strict rule but we do know at any given time which branches are being maintained, so we could say which. 13:43 drojf and a generall overview would be nice too 13:43 cait as long as somene wants to maintain... 13:43 cait because we don't have a s trict rule 13:43 drojf on the main page we have Introducing Koha 3.22. it should also say something about 3.20 and 3.18 being supported 13:43 cait you are right, i misread 13:43 cait ah 13:42 drojf i found that, it's not what i mean and out of date too 13:42 cait but we probably shoudl update a bit 13:42 cait https://koha-community.org/about/release-schedule/ 13:42 cait drojf: under about 13:39 drojf *unsupported. i really can't type today 13:39 drojf i told somebody to upgrade from 3.16 if they want to do proper tests because it is unspoorted, but i think they are correct that this information is available nowhere besides the release team wiki page for 3.24 maybe, which is not a place i'd expect people to search for it 13:37 drojf i found that annoying regarding elasticsearch, but i think we are not any better 13:37 cait hm give me a sec 13:36 drojf is it correct that nowhere on koha-community.org is information available about 1) currently supported branches 2) release life cycles? 13:29 cait so your suggestion and maybe a more informative error (number or oders, scarier...) would be good 13:28 cait i wouldn't mind not allowing it- but my feeling is that it might have a reason 13:28 cait maybe the wording needs to be scarier too :) 13:27 cait but i have seen that biblibre proposed a script to clean out old acq data - so that might be something that other libraries handle differently 13:27 oleonard cait: If there are cases where it is okay, we can focus on making the error more informative. 13:27 cait not something we do here - acq information is basically kept forever 13:27 cait I guess some libraries might get rid of old orderst aht way 13:26 cait i ugess that's one of the things wehre an answer gets complicated :( 13:25 oleonard cait I though you might know the answer to my question about whether it should be possible to delete funds with linked orders. 13:24 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=15791 normal, P5 - low, ---, koha-bugs, NEW , Don't delete a fund if existing orders are linked to it 13:24 oleonard cait did you see Bug 15791? 13:24 DD naaaa cant wait now.... 13:24 DD Yes will do that 13:24 drojf or go live when the import is finished :P 13:23 oleonard DD: Sounds like you may need to use Fast Cataloging in the interim and then process issues properly upon return 13:23 DD Thank you all 13:23 drojf hi tcohen 13:23 DD hence all this.. anyway no other option then 13:22 DD but i anticipate rush in the library- users asking for periodical issues.. which are yet not in mysystem 13:22 DD marc (=periodical title) multiple items(=loose issues) 13:22 tcohen morning 13:20 drojf oops. *catalogue 13:20 cait a record can have mulitple items 13:19 DD hmm 13:19 cait so you either create many or have one for each serial.. or one for all of them... there is no way around it 13:19 drojf you can't calaogue without creating records 13:19 cait an item in koha can't exist without a link to a record 13:19 DD ideally title should bo one marc and its loose issues shd not be 13:18 DD no because it willl create those many marc records.. 13:18 oleonard DD: Is that not a satisfactory solution? 13:15 DD yes thats the only option... 13:13 oleonard Sounds like Fast Cataloging? To quickly add a record upon checkout for something which was not cataloged? 13:12 DD how can i quickly just barcode a loose issue and chk out? .. is my problem 13:11 DD ? 13:11 cait i think there is a misunderstanding there somewhere 13:10 DD as i wil go live on monday without serails being migrated 13:10 DD yes but without acquisition directly putting on cataloguing creates marcs.. ideally there shd be one marc of a title and loose issues with barcode.. 13:08 cait with the numberin in 952$h 13:07 cait DD: i think usually all issues are attached to the serial record as items 13:07 wahanui serials is scary :( 13:07 DD serials 13:07 DD I need help on cataloguing loose issues without acquisition and withot creating marc record for every loose issue 13:06 tcohen ho 13:05 wahanui hey, DD 13:05 DD hi 12:26 drojf ha! 12:26 * drojf has coffee 12:26 huginn 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=15760 is not accessible. 12:25 cait ashimema: do you have time to qa on bug 15760 mabe? (security) 12:17 drojf awesome. I saw the error withe the same name and thought that is what we want…without realizing that i did not change anything in opac ;) i blame lack of coffee :P 12:12 Joubu heh, yes it is :) 12:11 drojf Joubu: i hope it's the expected behaviour this time ;) 10:54 drojf done. handing over to QA :) 10:48 cait coming back from a meeting and lots has happened :) 10:48 cait and also magnuse++ - good mailng list mail 10:48 cait Joubu++ ribasushi++ drojf++ 10:18 drojf is there a koha demo site with the ebsco plugin available? 10:03 andreashm country 10:03 andreashm contry-specific forks of koha? oh my... 10:01 * andreashm waves 09:42 * magnuse wonders what a "temptation engine" is :-) 09:25 * magnuse suspects khall triggered the auto escape 09:02 huginn cait: khall was last seen in #koha 18 hours, 46 minutes, and 41 seconds ago: <khall> I wonder if there is a way to only trigger the auto escape when the var is actually used 09:02 cait @seen khall 08:37 gaetan_B hello 08:35 wahanui kia ora, Joubu 08:35 Joubu hi 08:32 huginn cait: The current temperature in Friedrichshafen, Germany is 3.0°C (9:20 AM CET on February 11, 2016). Conditions: Clear. Humidity: 60%. Dew Point: -4.0°C. Windchill: 0.0°C. Pressure: 29.80 in 1009 hPa (Steady). 08:32 cait @wunder Konstanz 08:32 cait hi magnuse 08:31 magnuse hiya cait 08:22 cait hi all 08:14 huginn magnuse: The current temperature in Bodo, Norway is 0.0°C (8:50 AM CET on February 11, 2016). Conditions: Light Snow Showers. Humidity: 87%. Dew Point: -2.0°C. Windchill: -6.0°C. Pressure: 29.44 in 997 hPa (Steady). 08:14 magnuse @wunder boo 08:14 * magnuse waves 08:10 lds hello 07:58 wahanui que tal, alex_a 07:58 alex_a bonjour 07:42 reiveune hello 07:34 cait morning all, will be back in a bit 07:32 Francesca heya 07:26 marcelr hi #koha 07:02 Francesca daring cicada rescue complete 05:42 mtompset Have a good day (24 hour period), drojf Francesca #koha. 05:41 drojf have a good night mtompset 05:41 mtompset So, now to grab some before chauffeur duty hits. 05:41 mtompset Too much to do, too little time. 05:41 drojf sorry to hear that 05:41 mtompset I haven't been sleeping well lately. 05:40 mtompset It's 12:40AM. 05:40 mtompset Wishing my colleague would find more clients. Wishing another would merge my pull requests. 05:40 drojf what time is it at your place? 05:40 drojf things are alright. working a lot. trying to lure libraries into using koha. how about you? 05:39 mtompset I'm going to collapse into unconsciousness now. 05:38 mtompset Did you see the NorwegianPatronDB thread in the mailing list, drojf? 05:37 mtompset What's new with you, drojf. It's been a while. :) 05:37 mtompset Sadly failing qa one or two. 05:37 mtompset Looking for the occasional signoff. 05:36 drojf hi mtompset 05:36 mtompset Greetings, drojf. 05:36 mtompset I'm just tinkering. 05:25 drojf morning 05:10 wahanui i heard very early was 3 ;) 05:10 Francesca or very early 05:09 Francesca midnight is very late to be up and working 05:09 Francesca shouldn't you be sleeping? 05:09 Francesca ah 05:08 mtompset It's midnight here. :) 05:08 mtompset It was this morning. 05:08 Francesca is it snowing? 05:08 Francesca brrrr so cold 05:07 Francesca no worries :) 05:07 mtompset Sorry for a slow reply, Francesca. :) 04:55 huginn mtompset: The current temperature in Pleasantville, Richmond Hill, Ontario is -12.9°C (11:46 PM EST on February 10, 2016). Conditions: Scattered Clouds. Humidity: 79%. Dew Point: -16.0°C. Windchill: -16.0°C. Pressure: 29.85 in 1011 hPa (Rising). 04:55 mtompset @wunder l7e5y5 04:55 mtompset Freezing and sniffling. 04:50 huginn Francesca: The current temperature in Wellington, New Zealand is 24.0°C (5:30 PM NZDT on February 11, 2016). Conditions: Clear. Humidity: 38%. Dew Point: 9.0°C. Pressure: 29.95 in 1014 hPa (Steady). 04:50 Francesca @wunder wlg 04:48 Francesca you? 04:47 Francesca hot but cheerful 04:47 mtompset How are you? 04:47 mtompset Greetings, Francesca. 04:44 * Francesca waves 04:31 mtompset Well sucky about .raw. Though, rangi, wouldn't that mean we should be limiting its use? 03:10 mtompset dcook: What do you think of the patch idea? Good enough? 02:11 huginn wizzyrea: The operation succeeded. 02:11 wizzyrea @later tell pianohacker tyvm <3 01:15 kivilahtio code never lies (except when it comes to Serials-module and subscription actually meaning a serial) 01:15 kivilahtio mtompset: best way to figure Koha out is to dig in the debugger and start debugging. There is not easy way. Ofc the manual is also excellent, but cannot possibly cover everything. 00:30 mtompset I can't for the life of me get the one option to work.