Time  Nick         Message
21:24 wajasu       i looked into using libguestfs, and febootstrap (wich supports multiple distros) and  run the containiers with kvm with libvirt
21:22 wajasu       nested VMs is probably not viable without some headaches, but if i get my systemd migration done, i will mess with the lxc option.
21:18 jcamins      My host is a VM, so I figure it's best not to run  a VM under a VM.
21:16 wajasu       i i did clean up my VM build script, and it takes 4 minutes to creates a koha-common based VM, and i usually just sshfs the /home/koha/kohaclone from my hostOS, which has my git repos.
21:15 jcamins      Right.
21:14 jcamins      Ah, actual VM.
21:14 wajasu       i acutally started to set up lxc last night, and needed to use do some cgroups related config, so i put it off a bit.
21:13 wajasu       but ii was just using my VM sa a test/dev VM, not prod.
21:13 wajasu       in the VM, i had to edit /etc/fuser  or such to use  allow_other
21:12 jcamins      I have learned that sshfs requires unacceptable compromises to security.
21:12 wajasu       i am in the process of migrating to systemd today, as it seems that archlinux  and most distros are taking this route.
21:11 jcamins      Uh-oh.
21:11 wajasu       funny you asked.
21:11 wajasu       ok.
21:09 jcamins      wajasu: did you do that? If so, how do you share files between the container and the host?
21:08 jcamins      wajasu: as I recall you were working on changing your development system over to using lxc.
20:56 cait         rangi++
20:48 tweetbot`    [off] twitter: @27point7: "many thanks to @ranginui for signing off my 1st patch!  http://t.co/1daV6pbp #kohails"
17:20 jcamins      Good luck.
17:20 jcamins      You're welcome.
17:18 balin        dooh ... will try again later. Thanks!
17:15 jcamins      They should look like this: http://screencast.com/t/2nGfPtZeEunn
17:14 jcamins      balin: your settings for the LC Z39.50 server are not correct. It's not actually downloading any records, it's just displaying a spare error message with an import button.
17:13 balin        What am I screwing up?
17:13 jcamins      Oh, I see.
17:13 balin        have to run now ... will check on response later ...
17:12 balin        jcamins: http://tinyurl.com/9852n33
17:07 balin        hanging on the first one this time.
17:07 balin        trying again.
17:06 balin        imgur hanging on the 2nd image of 5 ...
17:05 jcamins      Thanks.
17:04 balin        the logs only show the same error ... I have marked with squiggly red what buttons/links I pressed ...
17:01 jcamins      A lot of people use Jing+screencast.com, but anywhere will work.
17:01 jcamins      balin: imgur.com is fine.
16:59 balin        jcamins - screen shots done. Wher could I upload them?
16:59 jcamins      I see why biblionumber=-1&breedingid=-1 would cause that error, but I don't see how one could get those arguments.
16:50 jcamins      Any chance you could do a screen capture of how you're trying to import a record?
16:50 jcamins      Really? This is bizarre.
16:49 balin        jcamins ... kids in bed, so I just went away from my nginx setup and tried with a plain port DNATing from the host (outside port) to the koha-lxc container ... I keep seeing the "Can't call method "title" without a package or object reference at /usr/share/koha/intranet/cgi-bin/cataloguing/addbiblio.pl line 828."
16:48 * jcamins    doesn't know what sort of SSH thing it could do.
16:47 jcamins      I can have the ephemeral container do some sort of SSH thing to connect to the host.
16:46 balin        sorry - ephermal is not my cup of tea yet ...
16:46 jcamins      Ooh, I know.
16:46 jcamins      That only seems to work for regular containers, not ephemeral containers.
16:44 balin        <topdir> contains a config (and the rootfs) ... its defined in the config.
16:44 jcamins      balin: my challenge is that lxc-console is interactive-only, and I'm still trying to figure out how to get the IP address for SSH.
16:39 balin        use ... suse? brrrr ... DEBIAN!
16:39 balin        I suse ssh ...
16:39 balin        jcamins two ways: ssh but there is also a lxc-console
15:48 * jcamins    wants to use lxc-start-ephemeral to test installation and configuration of releases.
15:46 jcamins      Well, ssh, I guess.
15:46 druthb       o/
15:46 jcamins      Unfortunately, I'm not understanding how to control it from outside the container.
15:45 jcamins      lxc is really cool.
15:45 jcamins      I didn't think you would.
15:45 liw          jcamins, I do not disagree
15:44 jcamins      liw: yes, but I feel like you should be doing that if you're in library school writing a paper purporting to be about an open source system.
15:43 liw          in my youth I was naive and co-founded the linux documentation project; I've learnt since that other people never read manuals :)
15:43 liw          jcamins, it often is :(
15:33 jcamins      Apparently suggesting looking at the manual was offensive.
15:23 jcamins      I think you will find it answers many of your questions.
15:23 jcamins      okayhi: have you read the manual?
15:19 okayhi       does koha have federated searching?
15:16 okayhi       thanks
15:16 cait         [off] koha.org is a different software
15:16 cait         and make sure you stay on koha-community.org websites
15:15 cait         http://koha-community.org/demo/
15:15 cait         I will find the demo link for you
15:14 cait         that's the manaul
15:14 wahanui      manual is at http://www.koha-community.org/documentation
15:14 cait         manual?
15:14 cait         demos?
15:14 cait         there is also a lot of documentation around
15:14 cait         and if you can't find a module or function you can ask
15:14 cait         i suggest you take a look at one of the demos
15:14 cait         okayhi: sorry, but we can't wrote your home work for you
15:14 mtompset     Have a good day (24 hour period), #koha.
15:14 mtompset     Sorry.
15:14 mtompset     Sadly, I can't answer that as I'm on my way out.
15:13 okayhi       what modules does koha have?
15:13 okayhi       hello
15:12 mtompset     same person coming and going.
15:12 wahanui      well, mibbit is linked from k-c.org
15:12 cait         mibbit?
15:12 cait         hm
15:12 okayhi       im currently writing a paper on koha and interested in if there are any add ons
15:10 student      hi im writing a paper on koha and im interested to find out if there are any add on features
15:06 * cait       didn't excactly mean that
15:03 jcamins      cait: not a problem, it's just kind of odd the way that tmux and the console emulator interact.
15:01 cait_away    hm I am sorry
14:48 jcamins      Wow. Running a console in tmux is kind of weird.
14:47 cait_away    about... um 4 years ago or so
14:47 cait_away    I did it almost without any linux knowledge
14:47 * cait_away  agrees with jcamins
14:47 mtompset     It's not that they were unclear... they required leaps of familiarity.
14:46 jcamins      mtompset: I have been on this channel more-or-less continuously for two years. Never in that time has someone qualified to run a git install reported that the instructions were unclear.
14:46 mtompset     But given that master is development... dependency issues are to be expected a bit. :)
14:45 mtompset     well, except for dependencies... and users it wasn't too bad.
14:44 jcamins      I have to tell you I have never encountered anyone running into problems doing a git install when what they actually wanted was a git install.
14:44 mtompset     Some of that is related to things that need to get cut.
14:43 jcamins      mtompset: but are they so long that no one will ever read through them now?
14:43 mtompset     Still needs a couple more passes.
14:43 mtompset     Without running as root. :P
14:43 mtompset     The Ubuntu git instructions are almost at an "acceptable, but not perfect" state.
14:43 jcamins      Yes, don't run the init scripts as root.
14:42 mtompset     And I found a way. :)
14:42 mtompset     Yes, but an install without having to edit the init scripts is nicer. :)
14:41 jcamins      If you don't know how to modify the init scripts, you shouldn't be doing a git install.
14:41 jcamins      If you're doing a git install, you can expected to know how to modify the init scripts.
14:41 jcamins      As myself.
14:40 mtompset     jcamins, do you do your git installs for koha as a koha user, or as yourself?
14:34 jcamins      Yeah, that'd be the next thing to try.
14:34 balin        Will see whether portforwarding gets me further tonight.
14:34 jcamins      Hehe.
14:33 balin        so whats ablue one ? ;)
14:33 jcamins      I fear it is something specific to lxc.
14:32 jcamins      (the user)
14:32 jcamins      It was a red herring.
14:32 jcamins      No, that has nothing to do with it.
14:29 balin        aha. But where is this coming from? Need to be a superlibrarian?
14:28 jcamins      breedingid should be positive.
14:28 jcamins      balin: okay... it shouldn't be possible to have a link like that.
14:28 balin        And yes, database user
14:28 balin        No records, no.
14:28 balin        jcamins: "cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber=-1&z3950=1&frameworkcode=Default&breedingid=-1"
14:15 mtompset     YAY! Figured out how to get it to work properly. Silly environment variables to by pass unset configuration variables.
13:30 mtompset     Shoot. I must have done something wrong. It's trying to index my git install as koha.koha
12:57 jcamins      And, just to confirm, you don't have any records in this database, do you?
12:56 jcamins      (you can redact the server name)
12:56 jcamins      With all the params.
12:56 jcamins      What is the URI you are accessing, exactly?
12:56 jcamins      I see the problem.
12:56 jcamins      Wait.
12:55 jcamins      You must currently be logged in as the database user?
12:55 jcamins      Create a new user, give it superlibrarian privileges, and log in as that user.
12:55 jcamins      Actually, one more thing.
12:54 balin        Grrr ... a defined patron category doesn't change things either ... port forwarding thus needs to be explored.
12:53 jcamins      Yeah, I think the next thing is to try port forwarding.
12:51 jcamins      And no combination of CGI arguments causes that to happen.
12:50 jcamins      Okay, it worked fine for me.
12:48 * jcamins    forgot that he now has a spare VM. :)
12:48 jcamins      Actually, let me try 3.8.5 on a spare VM.
12:48 balin        That's kinda tricky, as it's a remote server ... will try port forwarding in the course of the evening and report back, ok?
12:47 jcamins      Right.
12:47 balin        You mean without forwarding?
12:47 jcamins      Can you try accessing the Apache server directly?
12:47 balin        patron category is in the works ... gimme a sec.
12:46 jcamins      We've ruled that out, then.
12:46 jcamins      Okay.
12:46 balin        Defining a item type "Book" - am I to naive her? - and re-running the import produces the same error.
12:44 jcamins      Most people do not use the sample item types.
12:44 jcamins      It's very easy.
12:44 jcamins      It cannot be rerun, but I see no reason to start over.
12:43 balin        can the installer be rerun or do I have to start all over?
12:43 jcamins      It's easy to add an item type.
12:43 jcamins      At the very beginning.
12:43 jcamins      In the installer.
12:43 jcamins      You need to make sure you have at least one library, one item type, and one patron category.
12:43 balin        where?
12:42 jcamins      Not unless you select them.
12:42 balin        there isn't a bunch of predefined types?
12:42 jcamins      Maybe.
12:42 jcamins      Well, probably not item types.
12:41 jcamins      Yes, that might be it.
12:41 jcamins      Oh.
12:40 balin        MARC bibliographic framework test tells me: item type not defined 	at least 1 item type must be definedf - might that be it? I guess I need some howto on how to start playing with this after installation ... pointers?
12:38 balin        yes.
12:38 jcamins      Installed using package you said... correct?
12:37 balin        vanilla install in 10.10.10.3 ... nginx on the host forwards to 10.10.10.3:80 ...
12:37 jcamins      Okay, so it's not a Plack thing.
12:36 balin        yes.
12:36 jcamins      Are you using Apache in the lxc box?
12:36 balin        Koha version: 	3.08.05.000
12:35 jcamins      You're on 3.8.5, right?
12:35 balin        but now I anyway have this ""Can't call method "title" without a package or object reference at /usr/share/koha/intranet/cgi-bin/cataloguing/addbiblio.pl line 828." problem when trying to import from the library of conress ... any insight?
12:35 jcamins      It'll do very well for testing the Koha release process, I think.
12:34 balin        just recently started with lxc ... love it ... so easy to play and just scrap things ... I have base systems for debian testing, stale ,etc. lying around, which I just can clone and add too ... lovely!
12:34 jcamins      Oooh. That's a problem.
12:33 balin        the link obeys staff client base url, but one can't configure "https" there ...
12:33 jcamins      Ooh, lxc will perfectly meet my needs.
12:32 balin        to a lxc container that runs koha
12:32 jcamins      What are you forwarding to?
12:31 jcamins      It's just that the link doesn't obey staffclientbaseurl.
12:31 jcamins      I _was_ on the right track.
12:31 jcamins      Oh-ho.
12:31 balin        That's part of my nginx config and rewrites all incomming calls to http with https ...
12:30 balin        jcamins: http://mibpaste.com/UYiLyJ
12:30 * jcamins    can't promise anything.
12:29 cait         balin: I will let take jcamins over - because I am not good on the server administration sides and no more ideas
12:27 jcamins      balin: how did you solve the first problem with a rewrite rule?
12:27 balin        cait: sorry for the delay ... kids are very distracting: marflovour is marc21 ... DateTime::TimeZone requires an update, but should that be it?
12:24 huginn       04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=8636 major, P5 - low, ---, jcamins, ASSIGNED , Some dependencies are not listed by the installer
12:24 jcamins      Add a note on bug 8636.
12:23 mtompset     but a git/tarball install fails on the tests when koha_perl_deps.pl -m -u says everything is not required.
12:23 mtompset     So the build debian/control is fine.
12:22 mtompset     The problem we have with dependencies is that it needs to be in 3/4 places right now.
12:21 jcamins      Chris is removing the memcached dependency that isn't used.
12:21 jcamins      That would be why Chris isn't removing it.
12:20 mtompset     and if it is only used in tests, then the tests need changing too.
12:20 mtompset     that's why the test failed.
12:20 mtompset     cached-memcached-fast IS used.
12:20 mtompset     But I didn't write it down. ARG!
12:20 jcamins      He is going to move the Memcached dependency that isn't used.
12:19 mtompset     I am positive I read a bug where Chris was going to remove the memcached one.
12:19 mtompset     not required.
12:19 mtompset     libdbd-mock-perl and ....
12:19 mtompset     i was doing a fresh from scratch install.
12:19 mtompset     I just cloned it!
12:18 jcamins      I think probably you need to update your git repository.
12:17 jcamins      mtompset: both those packages were added to PerlDependencies ages ago.
12:14 huginn       jcamins: 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=7409 normal, P5 - low, ---, robin, In Discussion , Missing dependencies for Debian package
12:14 huginn       jcamins: 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=8636 major, P5 - low, ---, jcamins, ASSIGNED , Some dependencies are not listed by the installer
12:14 huginn       jcamins: 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=5327 enhancement, P3, ---, bart.tj, ASSIGNED , Omnibus for unit tests required for all C4 modules
12:14 huginn       jcamins: 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=8402 enhancement, P5 - low, ---, gmcharlt, NEW , replace 'install_misc/debian.packages' file with 'koha-debian-deps.pl' script
12:14 huginn       jcamins: 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=5599 normal, P5 - low, ---, cnighswonger, NEW , koha_perl_deps.pl and PerlDependencies.pm don't compare $VERSION numbers correctly
12:14 jcamins      @query missing dependencies
12:14 huginn       jcamins: 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=4847 minor, P5 - low, ---, robin, NEW , Python required for Debian package builds
12:14 huginn       jcamins: 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=2131 enhancement, P5 - low, ---, paul.poulain, NEW , Enhanced Content - Multiple Choices
12:14 huginn       jcamins: 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=8402 enhancement, P5 - low, ---, gmcharlt, NEW , replace 'install_misc/debian.packages' file with 'koha-debian-deps.pl' script
12:14 huginn       jcamins: 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=5599 normal, P5 - low, ---, cnighswonger, NEW , koha_perl_deps.pl and PerlDependencies.pm don't compare $VERSION numbers correctly
12:14 huginn       jcamins: 04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=2092 enhancement, P3, ---, gmcharlt, NEW , Koha should support Unicode 6
12:14 jcamins      @query dependencies
12:14 mtompset     That doesn't solve a lack in the PerlDependencies.pm or ubuntu.packages -- but it does explain the explosion in errors.
12:11 jcamins      mtompset: search for "sneakily."
12:10 cait         and hi mtompset and jcamins
12:10 cait         so not trying to use the advanced search, just one or 2 simple but specific keywords
12:09 cait         and more general searches work better for me
12:09 cait         if a bug mght be closed, using ALL in front of your search words might help
12:09 mtompset     How do you search bugzilla so you can find those? I never can seem to find anything.
12:08 jcamins      (and it's still running)
12:06 jcamins      I started it... more than 9 hours ago.
12:06 jcamins      I'm running a security scanner against master.
12:05 jcamins      Wow.
12:04 jcamins_away mtompset: there's already a patch for that.
11:51 cait         bzw. wird angezeigt, dass etwas fehlt?
11:51 cait         und unter mehr > über Koha - sind dort die pakete alle grün?
11:51 cait         in den system preferences, steht dort bei marcflavour marc21?
11:50 cait         ich bin mir nicht sicher
11:50 cait         hm
11:43 balin        What might this mean?
11:43 balin        "Can't call method "title" without a package or object reference at /usr/share/koha/intranet/cgi-bin/cataloguing/addbiblio.pl line 828."
11:43 balin        Hi. Worked around my https/http issue when accessing z39.50 search in cataloging by nginx rewriting. I can now actually query the LOC but when I try to import the result I hit this erreo:
10:30 mtompset     had to install libdbd-mock-perl and libcache-memcache-fast-perl to get the tests to pass.
10:29 mtompset     warnings, as rangi would insist. ;)
10:26 drojf        as in errors?
10:25 mtompset     wow... make test just got noisier!
10:23 drojf        no coffee for me, got club mate (a softdrinknwith yerba mate) for my coffeine needs
10:22 mtompset     Sounds like a coffee commercial is needed. "The best part of waking up, is folgers in your cup."
10:21 drojf        sorry, still waking up ;)
10:19 mtompset     That was a slow reply, drojf. ;)
10:18 drojf        hi #koha
10:07 mtompset     Now to document how to handle them.
10:06 mtompset     Okay "make test" with a few failures.
09:53 mtompset     I'm at the "make" step now. :)
09:52 Oak          :) hmmm
09:52 mtompset     I never made it completely through yet.
09:52 mtompset     I'm doing a git installation to test the Ubuntu instructions... they need to get tested.
09:51 mtompset     Tired and stressed. Nothing new. :)
09:51 Oak          how are you?
09:51 Oak          hello mtompset :)
09:50 mtompset     How goes it?
09:50 mtompset     Greetings, Oak and drojf.
08:31 liw          mtompset, you're welcome
08:29 mtompset     Thank you for your feedback, liw. :)
08:00 mtompset     Okay. I'll go with a branch. I don't want to go in a direction that makes it harder for newbies (like myself) on a forward basis.
07:59 liw          mtompset, it's your local repository, you're allowed to do anything you like with it; however, it's easier to do any commits to a dedicated branch rather than directly to master, for easier collaboration with others; if you're not making any commits, you should be able to build off master no problem
07:59 mtompset     I think that was a bad idea on my part.
07:58 mtompset     Right now, the way they are written. It does a detached head.
07:58 mtompset     I'm working on the git instructions for Ubuntu.
07:57 cait         ?
07:56 mtompset     Who could give me an authoritative answer?
07:55 mtompset     and there's my dilemma.
07:55 cait         hm for installation I think it should be ok to do without a branch
07:54 cait         always use a new branch for any changes
07:54 cait         never change master
07:54 cait         create a new branc
07:54 mtompset     should I build off what I just cloned, or should I check something out before I build?
07:53 mtompset     I've cloned up the koha git.
07:53 mtompset     Let's pretend I've never used git before.
07:53 mtompset     Okay... question... I need some git advice.
07:34 balin        I will opt for nginx to just redirect everything to "https" - let's see whether that's going to wor.
07:16 * mveron     has to head away
07:15 mveron       I commented the bug.
07:11 mtompset     Instead of Milli Vanilli's hit, "Blame it on the Rain" we'll have "Blame it on Solr"
07:09 mtompset     That would have been my guess -- let's blame Solr. ;)
07:07 cait         ah
07:06 huginn       04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=8233 major, P2, ---, jonathan.druart, Pushed to Master , New search engine layer - introduce solr without breaking anything else
07:06 mveron       ...and got: Bug 8233: Followup: Search engine layer: Add dependencies.
07:06 mveron       I did following search:  git log -SJSON::Any --pretty=oneline --abbrev-commit
07:04 mtompset     (well, if library was your instance name)
07:02 druthb       Then the virtualhost configs
07:02 mtompset     and /etc/apache2/sites-available/library
07:01 druthb       Yep
07:01 mtompset     I think /etc/apache2/ports.conf?
07:01 mtompset     Yes, it is 443... so you'll have to tell apache to listen on 443 instead of 80.
07:01 druthb       443, yes
07:00 mtompset     Shoot... I forget the port number.
07:00 mtompset     No, because you will have to tweak your apache settings to listen to 443?
07:00 cait         it's more a system administration kind of thing
07:00 cait         and to really make it work nicely oyu will need certificates
07:00 cait         but I am not sure it will be enough
07:00 cait         system preferences are in administraiton in the gui
06:59 balin        system preferences as in gui or on the fs?
06:59 cait         I tihnk you have to do something in your apache configuration
06:59 cait         [off] https://hfjs.bsz-bw.de
06:59 mtompset     Perhaps specify the Intranet/OPAC urls expressly that way in the system preferences?
06:59 cait         yes, we do that for our installations
06:58 balin        Sorry if I repeat myself (more people awake now): is there any way to force koha to make links "https" rather than "http"?
06:54 druthb       Frequently
06:54 cait         mtompset: that's the problem, yes
06:54 * cait       nods
06:54 mtompset     We are our own worst critics, are we not?
06:53 druthb       Cait's opinion on my photogenic-ness may not agree with mine.
06:51 druthb       Heh.  I'm not very photogenic.  I manage not to scare lil kids with this face, but that's about it
06:49 mtompset     My difficulty would be getting a decent photo. I'm only photogenic when I fork out big bucks to professional photographers. :(
06:47 druthb       About.me is pretty slick.  Nice for an online biz card like that
06:46 mtompset     BTW, I like the simple yet functional layout of the page.
06:46 druthb       !  I'll check on that.  It's waaaay out of date.  I haven't blogged since May.  :/
06:44 mtompset     Oh, I tried to follow the librarygeekgirl.net link. It's not working for me.
06:44 druthb       Nope.   Probably this weekend.
06:43 mtompset     Greetings, druthb. I thought you were going to get a newer photo? Haven't had time yet?
06:42 druthb       Hi
06:42 wahanui      druthb is http://about.me/druthb
06:42 cait         druthb?
06:42 cait         hi druthb
06:40 mtompset     Nah, you just need a M.D. -- Mountain Dew. Maybe some Vitamin C (Coke). ;)
06:40 cait         :)
06:40 * mveron     needs some coffee
06:38 mveron       Wikipedia :-)
06:38 mveron       Aurora habet aurum in ore  :-)
06:37 cait         heh
06:36 mveron       Morgenstund hat Gold im Mund :-)
06:36 cait         still wakiing up :)
06:36 * cait       waves back
06:36 * mveron     waves to cait :-)
06:36 cait         added I mean
06:35 cait         hm I think it waqs quite recent
06:34 mveron       3.09.00.061
06:34 mtompset     I just checked my 3.8.5 and it isn't there.
06:34 mtompset     What version?
06:34 mtompset     Really?
06:34 mveron       mtompset: It appears ont the About page: JSON::Any 	1.22 (marked yellow) and I was wondering where it is used
06:30 mtompset     Hmmm... mveron, good question. Perhaps it is a dependency of another library?
06:23 mveron       ...and I can't find out where JSON::Any  is acutally used, behalve of PerlDependencies.pm
06:14 mveron       http://search.cpan.org/~perigrin/JSON-Any-1.29/lib/JSON/Any.pm#DEPRECATION
06:14 mveron       I wanted to track down perl modules that need updates. It seems, that JSON:Any ist depractated?
06:02 mveron       Good morning #koha
05:25 balin        Is there any way to tell koha to use "https" rather than "http" for all links or do I have to rewrite those through nginx?
05:24 balin        I figured out why: the button is linking to "http", while I am piping all connections through "https" using nginx.
05:23 balin        Yesterday I reported that /cgi-bin/koha/cataloguing/z3950_search.pl wasn't working for me from cataloging --> z39.50 search
04:21 eythian_     or just submit Koha as your project ;)
04:20 eythian_     cjh: you know what you have to do: support MARC and Z39.50 :)
03:48 tweetbot`    [off] twitter: @_cjh: "considering that I work on #kohails; I find it amusing that I have to write a toy library system for my databases project."
03:22 huginn       04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=3652 critical, P1 - high, ---, oleonard, Pushed to Stable , XSS vulnerabilities
03:22 jenkins_koha Chris Cormack: Bug 3652: Fixing a typo
03:22 jenkins_koha Project Koha_3.8.x build #201: SUCCESS in 38 min: http://jenkins.koha-community.org/job/Koha_3.8.x/201/
02:54 jcamins      But patched.
02:53 jcamins      Absolutely bizarre.
02:53 huginn       04Bug http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=8914 normal, P5 - low, ---, jcamins, Needs Signoff , Blank search that returns invalid authorities fails under Plack
02:53 jcamins      Bug 8914.
02:43 jenkins_koha Starting build #201 for job Koha_3.8.x (previous build: SUCCESS)
02:33 rangi        hmm yeah it must
02:32 jcamins      $authtype = undef, and it still keeps trying $authtype->{whatever}
02:32 jcamins      defined ($authtype) ? $authtype->{whatever} : '' doesn't work.
02:32 jcamins      I think it must.
02:31 rangi        hmm it might
02:31 jcamins      Does Plack overload defined()?
02:30 jcamins      You're welcome.
02:30 rangi        thanks for the heads up
02:29 rangi        yep it was spotted when testing and fixed, i think she attached the wrong patch never mind ill fix now for 3.8.x
02:29 jcamins      The problem only shows up when you have a sort set.
02:28 rangi        ta
02:28 rangi        guess she didnt
02:28 jcamins      Yeah, the page numbering one has that problem.
02:28 rangi        hmm darn, the signed off one that paul should have pushed should have been fixed, i was sure cait fixed it when signing off
02:27 jcamins      I was just cherry-picking off of 3.8.x and resolving the conflicts myself.
02:27 jcamins      rangi: oh, did you have different ones for 3.6.x?
02:25 rangi        jcamins: the signed off one should be the fixed version
02:23 huginn       jcamins: The operation succeeded.
02:23 jcamins      @later tell gmcharlt When you get a chance could you add the key I e-mailed you to git.k-c.org? I tried to push 3.6.x, and it didn't recognize my credentials.
02:23 jcamins      *drat
02:22 jcamins      Well, drath.
01:47 eythian_     I've been using it quite well for the migration tools stuff.
01:47 jcamins      Okay, that makes sense.
01:47 jcamins      I see.
01:47 eythian_     it wouldn't suit koha proper, but the smaller things along-side it that don't use bugzilla etc.
01:46 eythian_     jcamins: yeah, installing a local gitorious instance. It's just a full-functional thing compared to gitweb, so you can submit patches and make merge requests and such like.
01:42 jcamins      rangi: there's an error in one of your 3.8.x XSS patches, I think. "|htm l" instead of "|html "
01:39 jcamins      rangi said you meant installing gitorious on git.k-c.org, not their hosting, but I don't quite see what gitorious offers that gitweb + real git does not.
01:39 jcamins      eythian: why would we want to use gitorious?
01:37 wahanui      OK, eythian_.
01:37 eythian_     wahanui: wallet inspector is <reply> If you're a wallet inspector, how come I never see you at the staff meetings?|<reply> I don't suppose I could talk you into looking the other way this once?|<reply> Ok, here you go.
00:33 jcamins      (no objection, I just don't know why we would)
00:32 jcamins      Why would we want to?
00:31 jcamins_away Oh.
00:25 rangi        On our server to give that interface to ppl
00:25 rangi        I think he meant we could install gitorious alongside gitweb
00:02 jcamins_away eythian: we have a gitorious mirror.